 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion Groups General ModelsRailroadsRocketsRadio Controlled Air ModelsHelicoptersLand ModelsWater ModelsModelGeeks.com Contact UsLink To UsSearch & Site Map |
Model Forum / Radio Controlled / Air Models / October 200460 size Raven Kit
Hello group. I picked up this kit this past summer. I will be building it this winter. Any suggestions for 3D set-up. It looks like it might be a good candidate. I would like any comments good or bad on this plane. I have only seen a profile version of the Raven, not a full model. Thanks John Y. I bought one already built. Weighed 9.5 lbs. Flew great with a Super Tigre .75 or a four stroke .91. Landing gear is weak. Tip stalls at slow speeds. Land it hot or it will cartwheel after tip stalling or you'll take off the gear for sure. Very aerobatic. Don't use too much elevator or it'll snap. DDeadly > From: jkidless@rcn.com (John) > Newsgroups: rec.models.rc.air [quoted text clipped - 8 lines] > Thanks > John Y. Lighten it up as much as you can by replacing wood where possible . The plane builds very heavy. Check this out as well http://groups.google.com/groups?q=raven+group:rec.models.rc.air&hl=en&lr=&ie=UTF -8&start=10&sa=N Don > Hello group. > I picked up this kit this past summer. I will be building it this [quoted text clipped - 3 lines] > Thanks > John Y. |
Reply to this Message
Signature |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2009 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.