Model Forum / Radio Controlled / Air Models / March 2005

For break in use a 20x8, proabably any brand will do. For flying it's gonna
depend on your aircraft but I'm getting great performance with a Zinger Pro
20x10 on my 1/4 scale Pitts M12. Bolly 20x10 is highly recommended (carbon
fiber = expensive), as is the 3W wood prop. I read several people commenting
on excellent performance with the Bambula 20x10.

Haven't tried the Perry carb and pump. The stock carb is much like a Perry
and works very well. A pump is not needed unless you are placing the fuel
tank far from the engine. In that case, I'd recommend a Cline (or similar)
regulator. Simpler to set up and adjust than a pump from what I've read.

Hello all :)
I have a Moki 2.10 in a world models 80inch extra and it runs grea
without a pump. BUT!!!!! you need to run large fuel line and larg
brass tube's in the tank. I am using 5/32 inch brass tubing and Prathe
large fuel line. as far as a prop goes I used a Zinger 20x8 for break i
and using it for flying. I may use a 20x10 but for now I'm happy wit
20x8 besides my wife said she will bar me from the hobby shop if I bu
another thing for my plane LOL :

--
~SnApRoL