Ace Digipace 1 operations manual

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Brian W. Allen - 28 Feb 2004 22:29 GMT

Greetings all

I have picked up a couple of Ace Digipace 1 cyclers as of late and am in
need of the Operation Manual. I have a copy of the Assembly
Instructions but would like to get a copy of the Operation Manual.

Does anyone on the group have a copy they could xerox and mail to me
(for a few coins of the realm of course) or a site on the web that might
have a copy available. I have done some looking but have not found a
copy of the Operation Manual.

Thanks in advance!!

Brian Allen

Reply to this Message

Dan Thompson - 29 Feb 2004 00:30 GMT

Brian,

Goto http://groups.yahoo.com/group/acerc/ and join up and ask your question. It
is a new group that just started a couple days ago for all ACE products up to
but not including the Micropro 8000.

>Greetings all
>
[quoted text clipped - 10 lines]
>
>Brian Allen

Dan Thompson (AMA 32873, EAA 60974, WB4GUK, GROL)
remove POST in address for email

Reply to this Message

mcduff - 13 Oct 2008 05:59 GMT

Hi all: I also have a Ace digipace 1 cycler, and if possible would
greatly appreciate a copy of
the manual.
bingles@neptune.on.ca

(in meantime, I have a 5 cell 950 mah pack, discharge time was 97.5
minutes, I suspect that
is not good, not sure, maybe someone can look at that for me. )

appreciate all your help

Brian I.

>Greetings all
>
[quoted text clipped - 10 lines]
>
>Brian Allen

Reply to this Message

Model Forum / Radio Controlled / Air Models / October 2008

Ace Digipace 1 operations manual