Need CG help

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

MEpst22487 - 02 Apr 2004 01:50 GMT

I'm finishing up an orphaned Hangar 9 1/3d Extra. I have no documentation and
would appreciate if someone could supply the CG placement for me.
Thanks, Mitch

Reply to this Message

RedFred1 - 02 Apr 2004 03:42 GMT

>I'm finishing up an orphaned Hangar 9 1/3d Extra. I have no documentation and
>would appreciate if someone could supply the CG placement for me.
>Thanks, Mitch

Here is a link to a site to help you figure it out for yourself! Much more
useful than someone telling you where it is.

http://homepages.ihug.co.nz/~atong/

FredD

Reply to this Message

MEpst22487 - 02 Apr 2004 12:25 GMT

Not where it is now Fred....where the designer says its SUPPOSED to be. Mitch

Reply to this Message

RedFred1 - 02 Apr 2004 13:12 GMT

>Not where it is now Fred....where the designer says its SUPPOSED to be.
>Mitch

There are several links there that will help you calculate where it should be
based on the wing planform...thats how the manufacturers and designers do it.
There are also links to help you find where it is now so you know where to move
it!

FredD

Reply to this Message

Gregg Uhlendorf - 04 Apr 2004 21:55 GMT

> I'm finishing up an orphaned Hangar 9 1/3d Extra. I have no documentation and
> would appreciate if someone could supply the CG placement for me.
> Thanks, Mitch

If it's this H9 1/3 Extra 330S, the manual is here:
http://horizon.hobbyshopnow.com/ProdInfo/Files/han1175-manual.pdf

Reply to this Message

Model Forum / Radio Controlled / Air Models / April 2004

Need CG help