 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion Groups General ModelsRailroadsRocketsRadio Controlled Air ModelsHelicoptersLand ModelsWater ModelsModelGeeks.com Contact UsLink To UsSearch & Site Map |
Model Forum / Radio Controlled / Air Models / April 2004Manual for a JR XF-421
Just bought one from the family of a deceased club member. All my other radios are Hitec and Futaba, if you have a manual or know where I can get one please let me know. It came with a 40 size PT-19 that I can't find who made it, one club member said he thought it was a House Of Balsa kit, but I don't see one on there web-site. TIA Donald Hi, it's here : http://horizon.hobbyshopnow.com/shared/techinfo/jrp5212-manual.pdf Olivier  Signaturehttp://users.belgacom.net/TX2TX : buddy box compatibility problems between different brands of RC-transmitters. To answer, remove "nopub" from tx2tx@belgacomnopub.net > Just bought one from the family of a deceased club member. All my other radios > are Hitec and Futaba, if you have a manual or know where I can get one please [quoted text clipped - 3 lines] > TIA > Donald Thanks for the reply. I found the download you refer to, but it downloaded the pdf file and I can't read it. I have all the trims and sub trims figured out but can't seem to get it to change model numbers. Since I plan on using this TX on two planes I need to be able to access both models. Thanks again Donald Donald, Go back to the jr site and there should be a link to the acrobat reader program, it is a free download and it will allow you to open the .pdf file. John > Thanks for the reply. I found the download you refer to, but it downloaded the > pdf file and I can't read it. I have all the trims and sub trims figured out > but can't seem to get it to change model numbers. Since I plan on using this > TX on two planes I need to be able to access both models. > Thanks again > Donald My fault I thought he sent you to the site and not the file. You can also go to adobe's website and get the free reader. http://www.adobe.com/products/acrobat/readstep2.html This should get you the program you need to open the .pdf file. John > Donald, > Go back to the jr site and there should be a link to the acrobat reader [quoted text clipped - 11 lines] > > Thanks again > > Donald > Thanks for the reply. I found the download you refer to, but it downloaded the > pdf file and I can't read it. I have all the trims and sub trims figured out > but can't seem to get it to change model numbers. Since I plan on using this > TX on two planes I need to be able to access both models. > Thanks again > Donald Speaking of this radio, early versions of this radio had a problem with their chips. To be more specific, you could not have different airplane configurations for the two models. If I rememebr correctly on this radio, while pushing on the two black switches, you turn the radio on. This takes you to the model section where for either models you specify aircaft type, model name, ... etc. And the problem used to be that the no matter what you selected for aircraft types, the radio reverted both models to the same type. Guys, thanks for all of the reply's. I was able to download acrobat and I can now read the manual. The PT-19 I bought has a 48 inch wingspan, so I guess it probably is a 25 size, either way it is a great looking looking little plane and should be a great flyer from what I can see from what little time I have had it. I still have no idea where he may have bought thew kit from, so if you have any ideas let me know. Thanks Donald Guys, thanks for all of the reply's. I was able to download acrobat and I can now read the manual. The PT-19 I bought has a 48 inch wingspan, so I guess it probably is a 25 size, either way it is a great looking looking little plane and should be a great flyer from what I can see from what little time I have had it. I still have no idea where he may have bought thew kit from, so if you have any ideas let me know. Thanks Donald ======================= House of Balsa makes a PT-19 kit that's about that size. http://www.houseofbalsa.com/e/env/0001JYZlw7WjY9YiCw9q262/store/store-kits.html? link=/store/store-type-tem.html&item=products:k-41 Tell us what site you were able to get the manual from! > Guys, thanks for all of the reply's. I was able to download acrobat and I > can [quoted text clipped - 10 lines] > ======================= > House of Balsa makes a PT-19 kit that's about that size. http://www.houseofbalsa.com/e/env/0001JYZlw7WjY9YiCw9q262/store/store-kits.html? link=/store/store-type-tem.html&item=products:k-41 Thanks, I think you hit it on the head. Looks like mine,. size is about right. This must be an older kit because there are no lazer cut parts that I can see. Thanks Donald Tell us what site you were able to get the manual from! ====================== It's on the Horizon Hobby web site. Product info page- http://horizon.hobbyshopnow.com/products/description.asp?Prod=JRP5212** there's a link at the bottom to the manual. It's about 380kb. If you have a fast connection, the direct link to the manual is http://horizon.hobbyshopnow.com/ProdInfo/Files/jrp5212-manual.pdf Try Horizon hobbies for JR info & manuals > Just bought one from the family of a deceased club member. All my other radios > are Hitec and Futaba, if you have a manual or know where I can get one please [quoted text clipped - 3 lines] > TIA > Donald |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2009 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.