Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / Radio Controlled / Air Models / December 2004



Tip: Looking for answers? Try searching our database.

Great Planes F 15 Eagle...ribs

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
MK - 26 May 2004 23:30 GMT
I need to know how many ribs are under the wings center sheeting?
I went to GP web site and found the bal. point to be on the main spar at rib
5.
I can reasonably guess that rib 1 is the center.  If rib 3 is at the edge of
the sheeting than I'm close to a bal point. If the 2nd rib is at the outside
edge of the sheeting than the 15OZ I just put in the tail is a drop in the
bucket.
   I got the plane years age from a guy how was getting out of the hobby.
I think he got it at a Pawn shop in Waco.  It's a .40 size plane and it's
got an Irvine 60 up front(that runs)
Anyway, any input is appreciated.
mk
C.O.Jones - 26 May 2004 23:44 GMT
Lightly tap the sheeting with your finger.  While tapping, move your finger
across the sheeting side to side.  You should be able to feel the difference
between where ribs are located and where they are not.

Chuck

> I need to know how many ribs are under the wings center sheeting?
> I went to GP web site and found the bal. point to be on the main spar at rib
[quoted text clipped - 8 lines]
> Anyway, any input is appreciated.
> mk
Thesmo - 02 Dec 2004 17:38 GMT
How many ribs are in the wing? why not count from the outside?

>I need to know how many ribs are under the wings center sheeting?
> I went to GP web site and found the bal. point to be on the main spar at
[quoted text clipped - 11 lines]
> Anyway, any input is appreciated.
> mk
C G - 03 Dec 2004 02:21 GMT
>>I need to know how many ribs are under the wings center sheeting?
>>I went to GP web site and found the bal. point to be on the main spar at
[quoted text clipped - 11 lines]
>>Anyway, any input is appreciated.
>>mk
I happen to have this kit in the shop waiting to be built.  I pulled the
plans to have a look.  The first sheet I unrolled did not show the wing,
so I can't tell you the number of ribs, but it did have a side view of
the fuse which showed the CG.  The CG range is 114-139 mm back from the
where the wing contacts the fuse.  From the rear of the wing, again,
where it contacts the fuse, the CG range is 259-284 mm forward.  Hope
this helps.
MK - 07 Dec 2004 00:05 GMT
Thank you.
I smacked it in the other day.
May be rebuildable.
mk

>>>I need to know how many ribs are under the wings center sheeting?
>>>I went to GP web site and found the bal. point to be on the main spar at
[quoted text clipped - 18 lines]
> the wing contacts the fuse.  From the rear of the wing, again, where it
> contacts the fuse, the CG range is 259-284 mm forward.  Hope this helps.
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.