 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion Groups General ModelsRailroadsRocketsRadio Controlled Air ModelsHelicoptersLand ModelsWater ModelsModelGeeks.com Contact UsLink To UsSearch & Site Map |
Model Forum / Radio Controlled / Air Models / August 2004YS91AC Part needed
Looking for upper crankcase....head and sleeve not necessary...just the fined part. Phil AMA609 screw in or slip in sleeve? I don't know what YS .91AC YOU have but mine is built very different than that. On mine, the cylinder and head are one piece. The major part of the crankcase is also one piece, no uppr or lower. -- Paul McIntosh http://www.rc-bearings.com > Looking for upper crankcase....head and sleeve not necessary...just the fined part. > > Phil AMA609 Sorry Paul Dunno why, but I must have been thinking O.S. when I typed the original post. It's a YS91AC with a screw in sleeve. Used them for pattern few years back. Runs good but in an incident with the ground years ago a lot of cooling fins got broken off one side of the cylinder casting. I have one in my U CAN DO 60 and it's getting worn so I thought I would try to fix this one up. Phil AMA609 > I don't know what YS .91AC YOU have but mine is built very different than > that. On mine, the cylinder and head are one piece. The major part of the [quoted text clipped - 7 lines] > > > > Phil AMA609 You can still get most of the parts from YS Performance http://www.ysperformance.com or central hobbies http://www.centralhobbies.com -- Paul McIntosh http://www.rc-bearings.com > Sorry Paul > Dunno why, but I must have been thinking O.S. when I typed the [quoted text clipped - 17 lines] > > > > > > Phil AMA609 Sorry Paul Dunno why, but I must have been thinking O.S. when I typed the original post. It's a YS91AC with a screw in sleeve. Used them for pattern few years back. Runs good but in an incident with the ground years ago a lot of cooling fins got broken off one side of the cylinder casting. I have one in my U CAN DO 60 and it's getting worn so I thought I would try to fix this one up. Phil AMA609 -------------------------------------------------------------------------- ----------------------- I have a brand new one in the box if your interested. This is the first version with the screw in sleeve. DOUG |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2009 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.