RBC delta 400 kit ...... HELP NEEDED!

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

marion.ben@home.nl - 01 Jul 2005 18:48 GMT

Hi,

I just bought a RBC delta 400 kit.
The instructions for building this plane are not very clear.
Anybody out there who has built this plane and who can give advice to
me (or maybe send some pictures?

Thanks a lot!!

Reply to this Message

The Natural Philosopher - 02 Jul 2005 11:39 GMT

> Hi,
>
[quoted text clipped - 4 lines]
>
> Thanks a lot!!

www.ezonemag.com is your friend. I am fairly suere that build has been
covered in detail somewhere - ask around.

Reply to this Message

retiredVTT - 16 Sep 2005 19:16 GMT

marion.ben@home.nl Wrote:

> Hi,
>
[quoted text clipped - 4 lines]
>
> Thanks a lot!!

How did you make out with the construction...there is a colorful
building manual online atthe www.rbckits.com site ...I have one comin
next week ...looks like a fun project..!

Bil

--
retiredVT

Reply to this Message

Fubar of The HillPeople - 17 Sep 2005 01:10 GMT

Just ordered one myself after reading these posts.

Signature

Dan
AMA605992
KE6ERB
http://www.fubar1.net
"I've heard the screams of the vegetables..."
Take out the "trash" to reply

>
> marion.ben@home.nl Wrote:
[quoted text clipped - 12 lines]
>
> Bill

Reply to this Message

retiredVTT - 22 Oct 2005 03:48 GMT

Thank goodness for the online instructions at the RBC site ...'cause th
stuff that is written on the plan leaves a lot to be desired ...

I did my servo installation differently as I don't like burying th
servos in the wing with no way to service them..!

The front former, F1 I believe it is, should be made from thin pl
...it has a slot in it for the hatch tab to fit into and since it'
balsa, it breaks at the tab slot...I doubled mine up with 1/32" pl
after breaking it ...

I put a 400XT outrunner in mine and had planed to use a little 12 am
esc...but when I went to use it, I found it defective so grabbed an 1
amp Hacker and of course it won't fit where the 12 amp was to go, so
had to sort of tye wrap it in to get the maiden done tomorrow...

here are some pics..

Bil

+-------------------------------------------------------------------

|Filename: Delta 010.jpgxx.jpg
|Download: http://www.rcgroups.com/forums/attachment.php?attachmentid=622904

+-------------------------------------------------------------------

--
retiredVT

Reply to this Message

Fubar-One - 25 Sep 2006 21:47 GMT

I know its about a year later, but how did the maiden go? I have one of
these kits that I am planning to build very soon and I just happened to
acquire one of these 400XT motors. Did you use Lipos?
Just finished an MAE Nemesis II (flies great!) and am ready for my next
build.

Signature

Fubar-One

Reply to this Message

Model Forum / Radio Controlled / Air Models / September 2006

RBC delta 400 kit ...... HELP NEEDED!