O.K. Gang I'm confused:
I just finished a Four Star 120. Went to set up "Flaperons. I use a Futaba
6DA. Instructions says, Plug Right aileron into #1 the left into #6 then
switch on the #9 toggle in the back "its labeled Flaperon. Here's what
happens. Right stick the right aileron goes up the left does not move. Move
left stick the left aileron goes up the righ does not move. Move the flap
knob they both go down as expected. That can't be right HUH ???
any ideas ??
Denis Winters
Bill Fulmer - 25 Jan 2006 15:09 GMT
Sounds like the end point adjustment for Chs. 1 & 6 are not set properly...
Bill
> O.K. Gang I'm confused:
>
[quoted text clipped - 8 lines]
>
> Denis Winters
Denis Winters - 25 Jan 2006 18:15 GMT
"Sounds like the end point adjustment for Chs. 1 & 6 are not set
properly..."
Bill thaanks for the suggestion
Yeah it does: however I would think either aeilron would at least move a
little in the other direction:
But however the are both set to 100%
Denis
Bill Fulmer - 25 Jan 2006 21:44 GMT
But are they set at 100% in BOTH directions?? Move the aileron stick while
watcing the ATV screen.
Bill
> "Sounds like the end point adjustment for Chs. 1 & 6 are not set
> properly..."
[quoted text clipped - 7 lines]
>
> Denis
Mark Eastman - 26 Jan 2006 14:51 GMT
Check the aileron differential also. It sounds like maybe the flaperon
function has dialed all the "down" out of the opposite aileron.
St. John Smythe - 25 Jan 2006 15:40 GMT
> I just finished a Four Star 120. Went to set up "Flaperons. I use a Futaba
> 6DA. Instructions says, Plug Right aileron into #1 the left into #6 then
[quoted text clipped - 4 lines]
>
> any ideas ??
Well, that sure compensates for adverse yaw. ;)

Signature
St. John
Lewis's Law of Travel:
The first piece of luggage out of the chute doesn't belong to
anyone, ever.