servo suggestions

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Kevin - 24 Jun 2006 16:59 GMT

Hi all,
I have been searching for 2 FMA Direct PS-20LV sub-microservosbut have
been unable to locate them online. Does anyone know where I can find
them or have suggestions for similar servos. Here is a link the plane
I am building.
http://www.backyardflyer.com/click_trips/may05/pipercub_1.asp

Reply to this Message

Frank Schwartz - 24 Jun 2006 17:45 GMT

OK, so we all agree that Gordon shoots from the hip...and we must
accept the fact that subscriptions alone will not keep any magazine
afloat...they must have paid advertising to survive...and at least
they will say a product is not so hot..(as compared to "pure trash")
where other magazines, including the biggie (RCM) who printed
glowing reviews of everything, most likely to keep advertisers happy.
You probably noticed that Hobby Lobby does not advertise in RC Report.
I was told that they got mad at a rotten review by RCR and quit
advertising with them. And, let's face it, for what it is worth...a
lot of Hobby Lobby advertising stretches the truth a bit, at least in
my opinion...such things as "this could be the best etc. etc...and
such things, which are misleading at best....so caveat emptor
(spelling?)
Frank Schwartz

Reply to this Message

Frank Schwartz - 24 Jun 2006 17:46 GMT

Oops..sorry, I posted a response inthe wrong thread..
Frank Schwartz

Reply to this Message

Funfly3 - 26 Jun 2006 23:43 GMT

any servos around 5 grams should be ok looking at this website
http://www.rcuniverse.com/magazine/article_display.cfm?article_id=445

Signature

My reply address does work

> Hi all,
> I have been searching for 2 FMA Direct PS-20LV sub-microservosbut have
> been unable to locate them online. Does anyone know where I can find
> them or have suggestions for similar servos. Here is a link the plane
> I am building.
> http://www.backyardflyer.com/click_trips/may05/pipercub_1.asp

Reply to this Message

Kevin - 28 Jun 2006 18:10 GMT

thanks for the reply...i'll give it a shot

> any servos around 5 grams should be ok looking at this website
> http://www.rcuniverse.com/magazine/article_display.cfm?article_id=445
[quoted text clipped - 7 lines]
> > I am building.
> > http://www.backyardflyer.com/click_trips/may05/pipercub_1.asp

Reply to this Message

Model Forum / Radio Controlled / Air Models / June 2006

servo suggestions