Ace Digipulse

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

sideslip - 21 Dec 2007 22:50 GMT

I have an Ace Digipulse but no power supply. Does anyone know what the
output voltage of the power supply should be. Now this is the Digipulse,
not the Super Digipulse. Don't know if it makes a difference.

Reply to this Message

Lew - 22 Dec 2007 16:30 GMT

> I have an Ace Digipulse but no power supply. Does anyone know what the
> output voltage of the power supply should be. Now this is the Digipulse,
> not the Super Digipulse. Don't know if it makes a difference.

I have a scanned image of the Super manual I can email if it helps,
My wall warts have an output of 24 vac at 1.8 amps
Lew

Reply to this Message

Six_O'Clock_High - 23 Dec 2007 04:12 GMT

>I have an Ace Digipulse but no power supply. Does anyone know what the
>output voltage of the power supply should be. Now this is the Digipulse,
>not the Super Digipulse. Don't know if it makes a difference.

ARRRGGGHHHH!

I have two in service. So I went to the shop and checked them both. One
output is 24VAC 1.5 amps and the other is 24VDC and 1.something amps.

I suspect the digipulse is the 24VDC one and the Super is the 24VAC model.

Holler if you want me to dig up the third one and look at it.

Jim Branaum
AMA 1428

Reply to this Message

A.T. - 23 Dec 2007 07:19 GMT

Ace R/C manuals at
ftp://ftp.rogueview.com/

regards
Alan T.
Alan's Hobby, Model & RC FAQ Web Links
http://homepages.ihug.co.nz/~atong/

>I have an Ace Digipulse but no power supply. Does anyone know what the
>output voltage of the power supply should be. Now this is the Digipulse,
>not the Super Digipulse. Don't know if it makes a difference.

Reply to this Message

Model Forum / Radio Controlled / Air Models / December 2007

Ace Digipulse