 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion Groups General ModelsRailroadsRocketsRadio Controlled Air ModelsHelicoptersLand ModelsWater ModelsModelGeeks.com Contact UsLink To UsSearch & Site Map |
Model Forum / Radio Controlled / Helicopters / June 2005FMS Interface
I cannot get FMS to work with the supplied interface cable by HOBBYJAPAN2000.com Someone said that cable will not work with the Windows XP OS. HOBBY JAPAN says it will. If anyone has gotten that cable to work with XP, please tell me what I must do to make it work. >I cannot get FMS to work with the supplied interface cable by > HOBBYJAPAN2000.com [quoted text clipped - 3 lines] > must > do to make it work. download a program called ppjoy and it will work if its the Esky or clone TX How can I tell if it is an Esky or clone TX.? HOBBYJAPAN says it is a Jabo II Zen Hua TX. > >I cannot get FMS to work with the supplied interface cable by > > HOBBYJAPAN2000.com [quoted text clipped - 5 lines] > > > download a program called ppjoy and it will work if its the Esky or clone TX Download the program suggested by Funfly3. If it works fine if not then you'll know. What have you got to lose.  SignaturePaul Woodsford Remove NOSPAM to reply. > How can I tell if it is an Esky or clone TX.? HOBBYJAPAN says it is a > Jabo [quoted text clipped - 10 lines] >> download a program called ppjoy and it will work if its the Esky or clone > TX That TX will work with PPJOY just Google for it > Download the program suggested by Funfly3. If it works fine if not then > you'll know. [quoted text clipped - 15 lines] >>> clone >> TX I downloaded PP Joy 4 or 5 times hoping it would work. It didn't. > Download the program suggested by Funfly3. If it works fine if not then > you'll know. [quoted text clipped - 14 lines] > >> download a program called ppjoy and it will work if its the Esky or clone > > TX http://www.hobbyjapan2000.com/SimulatorSetting.html check the above link and it should work >I downloaded PP Joy 4 or 5 times hoping it would work. It didn't. > [quoted text clipped - 18 lines] > clone >> > TX I tried that too several times and all I kept getting from the final window was, "Invalid sync byte". James at HOBBYJAPAN2000 told me to see if the keyboard allocations worked, and that if they did then something was wrong with my settings or with PP Joy. Most of the keyboard allocations do work, but for some reason my TX can't read the serial stream from my computer. I just keep getting "Invalid Sync Byte", whatever that means. > http://www.hobbyjapan2000.com/SimulatorSetting.html > check the above link and it should work [quoted text clipped - 20 lines] > > clone > >> > TX I will get my tx in tomorrow and make a note of my settings and post them on here >I tried that too several times and all I kept getting from the final >window [quoted text clipped - 34 lines] >> > clone >> >> > TX Thanks Funfly. There must be some way to make it work. > I will get my tx in tomorrow and make a note of my settings and post them on > here [quoted text clipped - 37 lines] > >> > clone > >> >> > TX first add the joystick controller using configure joystick program from ppjoy click add using in the parallel port type virtual joystick and controller number 2 click add next you should get a found new hardware wizard click done after its loaded the software it needs to find the joystick before you carry on?? next use the ppjoy com program click on the bleep on serial option and you should here it bleep though the pc speaker use the serial option zhen hua 5 byte protocol if that's ok go to fms chose joystick interface and map the joystick use tail channel 4 nick 2 roll 1 pitch 3 and inv pitch, rudder 4 elevator 2 aileron 1 throttle 3 inv let me know which bit does not work > Thanks Funfly. There must be some way to make it work. > [quoted text clipped - 46 lines] >> >> > clone >> >> >> > TX ___| reply |__________________________________________________________ Hi, I just bought an Esky FP RTF and trying to use FMS/PPJoy first but got the same message "invalid sync byte 120" in Zhen Hua 5 byte protocol. I have followed your setting from below but no luck. Any one make it work? Thanks. first add the joystick controller using configure joystick program from ppjoy click add using in the parallel port type virtual joystick and controller number 2 click add next you should get a found new hardware wizard click done after its loaded the software it needs to find the joystick before you carry on?? next use the ppjoy com program click on the bleep on serial option and you should here it bleep though the pc speaker use the serial option zhen hua 5 byte protocol if that's ok go to fms chose joystick interface and map the joystick use tail channel 4 nick 2 roll 1 pitch 3 and inv pitch, rudder 4 elevator 2 aileron 1 throttle 3 inv let me know which bit does not work "dah_dah" <dah_dah@sbcglobal.net> wrote in message news:TA8pe.803$Z44.289@newssvr13.news.prodigy.com... > Thanks Funfly. There must be some way to make it work. > [quoted text clipped - 7 lines] >> news:cF3pe.549$bv7.97@newssvr21.news.prodigy.com... >> >I tried that too several times and all I kept getting from the final >> >window >> > was, "Invalid sync byte". >> > James at HOBBYJAPAN2000 told me to see if the keyboard allocations > worked, >> > and that if they did then something was wrong with my settings or with > PP >> > Joy. Most of the keyboard allocations do work, but for some reason my > TX >> > can't read the serial stream from my computer. I just keep getting >> > "Invalid >> > Sync Byte", whatever that means. [quoted text clipped - 6 lines] >> >> news:o_Koe.201$Z44.27@newssvr13.news.prodigy.com... >> >> >I downloaded PP Joy 4 or 5 times hoping it would work. It didn't. >> >> > "Paul Woodsford" <paul.woodsford@virgin.net> wrote in message >> >> > news:kpHoe.1066$ls3.608@newsfe1-win.ntli.net... [quoted text clipped - 4 lines] >> >> >> >> >> >> > How can I tell if it is an Esky or clone TX.? HOBBYJAPAN says >> >> >> > it >> >> >> > is [quoted text clipped - 22 lines] >> >> > clone >> >> >> > TX _____________________________________________________________________ _________________________________________________________^M Posted via the -Web to Usenet- forums at http://forums.yourdomain.com^M Visit www.yourdomain.com and try our New products and services today! |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.