 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion Groups General ModelsRailroadsRocketsRadio Controlled Air ModelsHelicoptersLand ModelsWater ModelsModelGeeks.com Contact UsLink To UsSearch & Site Map |
Model Forum / Radio Controlled / Helicopters / August 2003FF6 and Dragonfly
Just bought a dragonfly micro heli.. It came with its own PCm transmitter, 35mhz.. But, It dosent seem to work with my FF6.. Any ideas please? Shaun. > Just bought a dragonfly micro heli.. It came with its own PCm transmitter, > 35mhz.. > > But, It dosent seem to work with my FF6.. Any ideas please? Do you mean it came with it's own PCM RECEIVER? If so, your FF6 may not be able to transmit on PCM, but then again, it may. You'll need to check the "para" (parameters) section of the menu and see if there's a PPM/PCM selection available. The modulation parameter usually appears as "Modulation" in the menu with the initials PPM, PCM or simply "F" for PPM on display. You'll need to change to the type you need and then switch the Tx OFF and then back on again to make the Tx "switch". (Important too, because without the switching on and off, the only thing that changes is the display and that's no use at all:-) If you mean that it DID come with it's own Tx, then and it's not talking to your already owned receiver, then you'll have to check the Tx you've just got to see if THAT one has the PCM/PPM selection .  SignatureBeav Please note my E-mail address is "beavis dot original at ntlworld dot com" (with the obvious changes) Beavisland now lives at www.beavisoriginal.co.uk > > Just bought a dragonfly micro heli.. It came with its own PCm > transmitter, [quoted text clipped - 15 lines] > your already owned receiver, then you'll have to check the Tx you've just > got to see if THAT one has the PCM/PPM selection . Thanks Beav, It came complete with its own receiver and "cheapo" PCM transmitter. I wanted to ditch the transmitter it came with and use my FF6 instead. The FF6 does indeed support PCM, I think the mistake I was making was not turning it on and off after changing the modulation type.. I will go and give it a go.. Thanks! Shaun. In order for your FF6 to work with Dragonfly, you need to change all the electronics including main gear on board the helicopter. > Just bought a dragonfly micro heli.. It came with its own PCm transmitter, > 35mhz.. > > But, It dosent seem to work with my FF6.. Any ideas please? > > Shaun. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2012 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.