dragon4/honeybee using honeybee 2 batteries

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

ian - 17 Aug 2006 20:04 GMT

my sad little dragon 4 uses 7.4volt 600mah nimh cells. the HB2 uses 11.1v
lipos. can i put them in the dragon (HB1 clone)?

Reply to this Message

Pete - 17 Aug 2006 21:50 GMT

Hi Ian,
I think your dragon 4 would blow a puff of smoke for you with the 11.1V
(3cell) LiPo pack. Why not try the 7.2V (2cell) 800mAh packs that are used
on the E-SKY heli's? 7.2V 1200mAh packs are also available. Slightly lower
head speed for longer.

You WILL need a different charger though.

HTH

Signature

Pete . .

------ Reply Separator ------

> my sad little dragon 4 uses 7.4volt 600mah nimh cells. the HB2 uses 11.1v
> lipos. can i put them in the dragon (HB1 clone)?

Reply to this Message

ian - 17 Aug 2006 22:23 GMT

> Hi Ian,
> I think your dragon 4 would blow a puff of smoke for you with the 11.1V
[quoted text clipped - 5 lines]
>
> HTH

I was thinking of the ripmax pro peak prodigy2. charger.

Reply to this Message

TXHELIJR@dbzmail.com - 20 Aug 2006 20:46 GMT

> my sad little dragon 4 uses 7.4volt 600mah nimh cells. the HB2 uses 11.1v
> lipos. can i put them in the dragon (HB1 clone)?

For the dargonfly, you need to use the 7.4V Lipo Battery
(http://www.hj2k.com/store/proddetail.php?prod=LIPOBATC), the 11.1V
lipo may damage your dragonfly helicopter

Reply to this Message

Model Forum / Radio Controlled / Helicopters / August 2006

dragon4/honeybee using honeybee 2 batteries