 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion Groups General ModelsRailroadsRocketsRadio Controlled Air ModelsHelicoptersLand ModelsWater ModelsModelGeeks.com Contact UsLink To UsSearch & Site Map |
Model Forum / Radio Controlled / Helicopters / August 2006walkera 22e Ball Linkage repair
I just broke a ball joint on my ball linkage set. Any interesting ways of repairing this? Apart from ordering the Walkera part >I just broke a ball joint on my ball linkage set. Any interesting ways of >repairing this? Apart from ordering the Walkera part CA it back on, then CAREFULLY drill a 2mm hole through the ball and part and secure it with a short 2mm screw. >>I just broke a ball joint on my ball linkage set. Any interesting ways of >>repairing this? Apart from ordering the Walkera part > > CA it back on, then CAREFULLY drill a 2mm hole through the ball and > part and secure it with a short 2mm screw. Good thinking. I suppose I have to add a counter weight onto the other side due to the screw? >> CA it back on, then CAREFULLY drill a 2mm hole through the ball and >> part and secure it with a short 2mm screw. > >Good thinking. I suppose I have to add a counter weight onto the other >side due to the screw? Not entirely necessary. The screw weighs very little and since that weight is so close to the head, the imbalance is negligable. Putting a screw through the opposing ball link wouldn't hurt if you feel so inclined. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.