Raptor 50 Titan

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Collin - 26 Jun 2007 19:55 GMT

I have just bought a Raptor 50 Titan and was wondering if anyone can advise
me the best main / tail blades to use ? I will be fitting the O.S. Hyper
50. At the moment I am flying the usual weekend style, with gradual steps
to learning 3D .....................................

Any advise will be great.

Reply to this Message

G-Dawg - 27 Jun 2007 03:10 GMT

>I have just bought a Raptor 50 Titan and was wondering if anyone can advise
>me the best main / tail blades to use ? I will be fitting the O.S. Hyper
>50. At the moment I am flying the usual weekend style, with gradual steps
>to learning 3D .....................................
>
> Any advise will be great.

Collin, I am running the stock wood blades on mine. If you're still
learning, you are going to have a crash at some point. If you don't crash
you're either a natural born heli pilot or your not expanding you skills). I
found a spare set of new wood blades on Ebay for when the inevitable
happens.

As for Carbon, I hear that the Thunder Tiger blades are great on the Raptor.

Reply to this Message

Mick Wilkinson - 02 Jul 2007 08:32 GMT

Hi Colin,
After quite a few years flying heli's, I'm only just starting
to get into 3D, I am currently using MAH tapered blades 60cm. with good all
round success,

>>I have just bought a Raptor 50 Titan and was wondering if anyone can
>>advise me the best main / tail blades to use ? I will be fitting the O.S.
[quoted text clipped - 11 lines]
> As for Carbon, I hear that the Thunder Tiger blades are great on the
> Raptor.

Reply to this Message

Model Forum / Radio Controlled / Helicopters / July 2007

Raptor 50 Titan