 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion Groups General ModelsRailroadsRocketsRadio Controlled Air ModelsHelicoptersLand ModelsWater ModelsModelGeeks.com Contact UsLink To UsSearch & Site Map |
Model Forum / Radio Controlled / Helicopters / August 2007Shuttle Feathering Spindle
I need to replace a feathering spindle in my shuttle, I recently bought second hand. It has a lot of upgrades which includes the feathering spindle. I have looked around various spares sites but can not find one like it. Can anybody identify it please. It is the same general size as a standard spindle, but has a larger diameter middle with a hole drilled through which then has a pin located through the yoke. There is a picture of it at http://home2.btconnect.com/bt--uk-connect01234567/Shuttle_Feathering_Spindle.jpg. Cheers Paul When I bend them on my King, I hammer them back on the anvil attached to the vice. Hammer gently and avoid the threads.  SignaturePosted via a free Usenet account from http://www.teranews.com >I need to replace a feathering spindle in my shuttle, I recently bought >second hand. [quoted text clipped - 4 lines] > spindle, but has a larger diameter middle with a hole drilled through > which then has a pin located through the yoke. You could straighten that in 2 minutes. SignatureBeav VN 750 Zed 1000 OMF# 19 |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.