 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion Groups General ModelsRailroadsRocketsRadio Controlled Air ModelsHelicoptersLand ModelsWater ModelsModelGeeks.com Contact UsLink To UsSearch & Site Map |
Model Forum / Radio Controlled / Helicopters / June 2008reflex flight sim
any one know how to set up autos in relex flight sim . useing th throttle hold i go into full throttle negative pitch, crash mode. wha settings should i use... any one know thanks -- pcm9 > any one know how to set up autos in relex flight sim . useing the > throttle hold i go into full throttle negative pitch, crash mode. what > settings should i use... any one know thanks, Check that within Reflex that your pitch and throttle inputs are not swapped in the sim. It sounds like this is what's happening: Throttle Hold gets enabled - pitch is pulled negative and so as you increase the throttle to pull yourself out of it it falls to the ground faster.  SignatureChris Hello Chris, thanks for the reply but im not sure that this is the problem. As soo as i hit the throttle hold switch i seem to get full negative pitch using the throtlle to increase pitch at this point seems to have n effect. Marti -- pcm9 > Hello Chris, > thanks for the reply but im not sure that this is the problem. As soon > as i hit the throttle hold switch i seem to get full negative pitch. > using the throtlle to increase pitch at this point seems to have no > effect. In that case are you sure that Reflex is picking up the throttle and pitch separately? I.E. they are not assigned to the same channel within the software. I don't have Reflex but know that FMS doesn't pickup the pitch but it does pickup the throttle so that is exactly what happens if you try to use throttle hold on that... the heli just drops to the ground as there is no pitch or throttle input. Try configuring a spare model memory on the TX from factory defaults just to eliminate any inadvertently enabled mixing in the memory that you are using. If that doesn't work try here: http://www.reflex-sim.de SignatureChris |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.