Model Forum / Radio Controlled / Land Models / August 2004

Well, I'm not really sure about online sources, but I do know that
they're also sold under the Duratrax, Sermos & Anderson names(Anderson
is the real manufacturer). Juist look under those brands for Power
Poles, & you should be able to find them.....:)

use deans pulgs
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXKX39&P=0

ARe you using the Dean's Ultra Plugs?

We have 7 vehicles with ESC's and about 25 batteries wired up with the
ultra plugs and none of them bind.

If you are using the Ultra Plugs and they are binding maybe it's the way
you solder the leads on. You can't let solder run into the plastic area
where the bar of metal is held.

Are you using 14 or 12 gauge silicone insulated wire leads?

These are the powerpole connectors...I have used them in the past and they work good. Once you learn the trick to soldering them they are very easy to work with.

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXD176&P=ML

These are the powerpole connectors...I have used them in the past and they work good. Once you learn the trick to soldering them they are very easy to work with.

http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXD176&P=ML

With the Deans Ultra Plugs just rub a little bit of graphite on the plug
ends with a graphite pencil or your finger. Works like a charm.

and having to re-solder...).  An overseas bud of mine has suggested a
"lightspeed" connector, but I have been unable to find hide or hair of it
anywhere.

If you are determined to get rid of the Deans Ultra Plugs, then go with a
"PowerPole" or "Sermos" connector.
I know DuraTrax labels them as Powerpole.
Tower Hobbies carries them.
You can find them in different amp ratings as well.
Although for the least resistance, it seems nothing beats the Ultra Plugs.

and having to re-solder...).  An overseas bud of mine has suggested a
"lightspeed" connector, but I have been unable to find hide or hair of it
anywhere.

Easy fix for the Deans Ultra Plugs (also known as "Super Plugs" outside USA)
is to drill a small hole through the side of male and female, insert a hex
key and use the two keys to easily pull apart without any damage to your
wires. Note: if Super Plugs are joined and pulled apart a few times before
first use, they are easier to separate later.
IMO Super Plugs are the best for RC use as small, light and less resistance
than others, in fact less resistance than standard 12g wire connecting to
them.

regards
Alan T.
Alan's Hobby, Model & RC Web Links
http://homepages.ihug.co.nz/~atong

and having to re-solder...).  An overseas bud of mine has suggested a
"lightspeed" connector, but I have been unable to find hide or hair of it
anywhere.