 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion Groups General ModelsRailroadsRocketsRadio Controlled Air ModelsHelicoptersLand ModelsWater ModelsModelGeeks.com Contact UsLink To UsSearch & Site Map |
Model Forum / Radio Controlled / Land Models / March 2005Ping! Billy bad a.s!
I noticed you have a few micro rs4's. If you could be so kind to answer a question for me. If you use a 14t pinion on a big block size motor will the motor heat up too much? Also i am running 6 cells. I've been running micros for some time. And have a big block in it, Speed 280BB > 300 size can, it's the same as the new trinity with the gold end caps. Anyways. It's running on 7.4 V LiPo's 1500's. I was running 13T, and it was coming in quite hot, and too fast 30+mph. Now down to 12T. I also added a heat sink and that help allot. It's a GWS 300 can size heat sink, you have to mod it a bit for it to fit. I think with the heat sink you could go to 15T without too too much heat. Hope that helps. >I noticed you have a few micro rs4's. > If you could be so kind to answer a question for me. > If you use a 14t pinion on a big block size motor will the motor heat > up too much? Also i am running 6 cells. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2009 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.