 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion Groups General ModelsRailroadsRocketsRadio Controlled Air ModelsHelicoptersLand ModelsWater ModelsModelGeeks.com Contact UsLink To UsSearch & Site Map |
Model Forum / Radio Controlled / Land Models / April 2005High torque steering servo ?
at 6 volts , what servo would you recommend to control the steering of the 8th scale monster truck ??? servo is just standard size.. thanks.. Brad Hitec HS-645MG Torque: 4.8VDC: 106.93 oz-in. (7.7 kg-cm) 6.0VDC: 133.31 oz-in. (9.6 kg-cm) Speed @ 60 Degrees: 4.8VDC: 0.24 seconds 6.0VDC: 0.20 seconds Bearing Type: Dual Ball Bearing Case Size: 1.59"x 0.77"x 1.48" (40.6 x 19.8 x 37.8 mm) Weight: 2.11 oz (60 g) Wire Length: 11.75" (Includes plug) Approx. Price $36 If you don't care that much about speed, I would recommend a GWS S-06 MG slightly taller than standard servo Approx. $20 MG replacement sets are inexpensive for this servo at about $6 www.servohut.com XTM High Torque servos are pretty inexpensive on ebay last I checked as well. www.ebay.com > at 6 volts , what servo would you recommend to control the steering of the > 8th scale monster truck ??? > servo is just standard size.. > > thanks.. > Brad Hitec HS-705MG $36 > Hitec HS-645MG > Torque: [quoted text clipped - 32 lines] > > thanks.. > > Brad My bad..the 705 is a 1/4 scale servo... of course with a dremel and some ingenuity I am sure it might work... =) > Hitec HS-705MG > $36 > Hitec HS-645MG > Torque: [quoted text clipped - 14 lines] > Wire Length: 11.75" (Includes plug) > Approx. Price $36 I'd second that. It's the strongest servo in it's size (from Hitec). No need to go to the 1/4 scale units.  SignatureThe Raven http://www.80scartoons.co.uk/batfinkquote.mp3 ** Now I will bring chaos to the world! > at 6 volts , what servo would you recommend to control the steering of the > 8th scale monster truck ??? > servo is just standard size.. > > thanks.. > Brad We run JR Z650 in our Savage and our 1:8th buggy, for the steering. thanks guys.... just bought a HS-645mg see how it goes , just about to put it in :) Brad... > at 6 volts , what servo would you recommend to control the steering of the > 8th scale monster truck ??? > servo is just standard size.. > > thanks.. > Brad If you break it, let us know. I doubt you'll have any problems with it.... IIRC 9.7Kg at 6V.... SignatureThe Raven http://www.80scartoons.co.uk/batfinkquote.mp3 ** Now I will bring chaos to the world! > thanks guys.... > just bought a HS-645mg [quoted text clipped - 9 lines] >> thanks.. >> Brad |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.