 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion Groups General ModelsRailroadsRocketsRadio Controlled Air ModelsHelicoptersLand ModelsWater ModelsModelGeeks.com Contact UsLink To UsSearch & Site Map |
Model Forum / Radio Controlled / Land Models / May 2005repair die-cast parts?
Anyone have any luck repairing die-cast components--cracks etc.? If so what products did you find worked the best? I was thinking jb-weld but haven't tried it as of yet. thx Stu > Anyone have any luck repairing die-cast components--cracks etc.? If so what > products did you find worked the best? I was thinking jb-weld but haven't [quoted text clipped - 3 lines] > > Stu Which die-cast part? Usually when a model breaks a Die-Cast part, we replace it with an aftermarket milled part. Justin I recently repaired a cracked block with jb weld..its holding up fine so far (after 4-5 tanks of nitro)..just used a dremel with a grinding stone and lightly ground the area over and around the crack..filled it in and let it dry...then sanded it down a bit... > Anyone have any luck repairing die-cast components--cracks etc.? If so what > products did you find worked the best? I was thinking jb-weld but haven't [quoted text clipped - 3 lines] > > Stu Thx will give the jb weld a try. > Anyone have any luck repairing die-cast components--cracks etc.? If so what > products did you find worked the best? I was thinking jb-weld but haven't [quoted text clipped - 3 lines] > > Stu |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2009 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.