I'm looking for the fastest motor to hop up a Rusty. The ESC will handle
down to 13T's. Any suggestions? I look at Tower Hobbies and there seem an
endless listing on motors. Why so many different ones?
Regs,
....Ed
> I'm looking for the fastest motor to hop up a Rusty. The ESC will handle
> down to 13T's. Any suggestions? I look at Tower Hobbies and there seem an
> endless listing on motors. Why so many different ones?
> Regs,
> ....Ed
different motors for varied types of use:
bashing
racing
small track
large track
no jumps
jumps
torque
speed
What's a "Rusty" and where will you be running it?
Ed Rowe - 08 Jun 2005 00:39 GMT
Traxxas Rustler running flat out on the street.
....Ed
> > I'm looking for the fastest motor to hop up a Rusty. The ESC will handle
> > down to 13T's. Any suggestions? I look at Tower Hobbies and there seem an
[quoted text clipped - 14 lines]
>
> What's a "Rusty" and where will you be running it?
kenji - 08 Jun 2005 00:52 GMT
> Traxxas Rustler running flat out on the street.
> ....Ed
I'd go with a 13T Orion V2, and get some more pinions to gear up.
The reason for the orion is so that you don't have to clean it as much,
cut the comm as much and don't have to replace the brushes so often.
Richard - 08 Jun 2005 03:32 GMT
> Traxxas Rustler running flat out on the street.
> ....Ed
I have run my Stampede with a Orion 14T and 15/87 gearing and it was down
right dangerous but good fun for a few minutes. If you are purely out to
make your Rusty into a land rocket and money is no option then get yourself
a brushless set-up. The only other thing to worry about with the Rusty's
and Stampedes is destroying the plastic idler gear and melting the plastic
casing on the gearbox with the extra heat of the modified motor.
A good source of information for the Rusty is
http://www.swami-rc.com/hopups.htm
Cheers
Richard
Justin Mahn - 08 Jun 2005 13:35 GMT
>>Traxxas Rustler running flat out on the street.
>>....Ed
[quoted text clipped - 11 lines]
> Cheers
> Richard
amen . . . novak is pretty nice.
CH4:D - 09 Jun 2005 08:32 GMT
> > I'm looking for the fastest motor to hop up a Rusty. The ESC will
> > handle down to 13T's. Any suggestions? I look at Tower Hobbies and
[quoted text clipped - 14 lines]
>
> What's a "Rusty" and where will you be running it?
I couldn't resist this thread as I am facing the same dilemma.
So based on the categories you posted how do we know which motor is for
what?
Scotty - 18 Jul 2005 21:25 GMT
>> I'm looking for the fastest motor to hop up a Rusty. The ESC will handle
>> down to 13T's. Any suggestions? I look at Tower Hobbies and there seem an
[quoted text clipped - 14 lines]
>
> What's a "Rusty" and where will you be running it?
Wish I'd known this before I ordered my new motor ;p, Is the Trinity Speed
Gems Pro AMber 17T good for bashing?