reviving my old RC10T

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

bob mcree - 19 Jan 2006 08:33 GMT

i have an original RC10T truck i haven't run in years. i just dusted it
off and bought a set of 3700 cells for it and i'm thinking about
replacing the old aluminum chassis. who is making composite floors for
these now, and can i use a T2/T3 chassis?

-bob

Reply to this Message

kenji - 19 Jan 2006 08:49 GMT

> i have an original RC10T truck i haven't run in years. i just dusted it
> off and bought a set of 3700 cells for it and i'm thinking about
> replacing the old aluminum chassis. who is making composite floors for
> these now, and can i use a T2/T3 chassis?
>
> -bob

don't dump a ton of cash into the thing. enjoy it as it is.

what's your goals with the truck? Racing? Bashing? Show Truck?

Reply to this Message

bob mcree - 19 Jan 2006 19:11 GMT

>>i have an original RC10T truck i haven't run in years. i just dusted it
>>off and bought a set of 3700 cells for it and i'm thinking about
[quoted text clipped - 6 lines]
>
> what's your goals with the truck? Racing? Bashing? Show Truck?

it's just a toy but i'd like it to go faster and i figured a lighter pan
would be the best way. i run a Kinwald 12T and a Tekin ESC it has a high
spd mtl gear steering servo, RPM suspension, oversize bearings, all the
stuff that was trick a few years ago. i thought i might be able to get a
composite pan for $50 or so...
-bob

Reply to this Message

Techpriest - 20 Jan 2006 13:50 GMT

RC10T4 Factory Team trucks sell for about $125 around here used. I
bought a used T3 w/o elec for not much more then what you hope to get a
chassis for. I agree with the others, I would enjoy it as is, or sell
it to a collector and get something to bash with.

To more directly answer the questions, no you can't use the T2/T3
chassis. The T2 was a complete redesign.

As for who is making parts, RPM does make some arms for it and that is
all I know of. AE does still have some old stuff in stock so you might
give them a call.

Keep an eye on eBay. Every once in a while some shop decides to clean
out the "back room" and puts up vintage parts.

Reply to this Message

bob mcree - 20 Jan 2006 17:46 GMT

> RC10T4 Factory Team trucks sell for about $125 around here used. I
> bought a used T3 w/o elec for not much more then what you hope to get a
[quoted text clipped - 10 lines]
> Keep an eye on eBay. Every once in a while some shop decides to clean
> out the "back room" and puts up vintage parts.

thanks for the advice guys. you're probably right that i should just
give this truck to one of my nephews and buy a new one. I'll take a look
on ebay and maybe pick up a used T4. i expect with the improvement in
fets over the last few years even my Tekin 610 speed control is a
dinosaur. -bob

Reply to this Message

Model Forum / Radio Controlled / Land Models / January 2006

reviving my old RC10T