Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / Radio Controlled / Land Models / March 2006



Tip: Looking for answers? Try searching our database.

RB Concepts TM928 motor

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
GTD - 10 Mar 2006 18:15 GMT
I am looking hard at the RB Concepts TM928 motor for my truck. I have
read (on the RB Concepts website) That it has no pull start. The
problem is, that my truck is an associated MGT, which has no means of
using a starter box, since the flywheel does not protrude through the
bottom of the chassis. I have been trying to find another means of
starting it, but have found none. Does anyone have any idea of how to
work around this? Will a pull starter from a TH728 fit it? Any info on
getting thisto work will be appreciated. Thank All...
DanTXD - 10 Mar 2006 18:22 GMT
>I am looking hard at the RB Concepts TM928 motor for my truck. I have
> read (on the RB Concepts website) That it has no pull start. The
[quoted text clipped - 4 lines]
> work around this? Will a pull starter from a TH728 fit it? Any info on
> getting thisto work will be appreciated. Thank All...

Hmmm, I've heard these RB big blocks are a bit prone to over heating, also,
very expensive.  Consider perhaps the Novarossi .28 - that's the most
powerful engine out (maybe not on paper, but all the quoted power outputs of
the cheaper engines are basically lies.).  Or if you wanna save a few quid,
SH.28 Pro 6 port or STS .28 are both fine motors, and the K4.6 - not as
powerful, but ultra reliable and an absolute breeze to tune.

Signature

Dan

GTD - 10 Mar 2006 19:26 GMT
> >I am looking hard at the RB Concepts TM928 motor for my truck. I have
> > read (on the RB Concepts website) That it has no pull start. The
[quoted text clipped - 14 lines]
> --
> Dan

Which Novarossi motor line? I see a Novarossi Rex that is a .28, and
another that is a 3-port novarossi, made by novarossi.
Thanks. ..
DanTXD - 11 Mar 2006 00:16 GMT
>> >I am looking hard at the RB Concepts TM928 motor for my truck. I have
>> > read (on the RB Concepts website) That it has no pull start. The
[quoted text clipped - 21 lines]
> another that is a 3-port novarossi, made by novarossi.
> Thanks. ..

The 3-port is less powerful I beleive, I'll get hold of the model name of
the one I'd had recommended....

TOP T528X is it I beleive, the 3 port is DAMN powerful, the 8 port is the
MOST powerful.

Signature

Dan

GTD - 13 Mar 2006 02:51 GMT
>The 3-port is less powerful I beleive, I'll get hold of the model name of
>the one I'd had recommended....
>
>TOP T528X is it I beleive, the 3 port is DAMN powerful, the 8 port is the
>MOST powerful.

Is that one still made? I'm not having any luck finding it.
Richard - 13 Mar 2006 08:28 GMT
> >The 3-port is less powerful I beleive, I'll get hold of the model name of
> >the one I'd had recommended....
[quoted text clipped - 3 lines]
>
> Is that one still made? I'm not having any luck finding it.

You could always try the Novarossi web site:
http://www.novarossi.it/eng/motori_truck_index.htm

Cheers
Richard
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2009 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.