GPM Knuckles & Integy Arms on Savage?

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Bob - 30 Dec 2006 20:03 GMT

Does anyone know if these parts are compatible? Will the GPM Parts fit
the Integy arms?

GPM Knuckles
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=170065349649

Integy Arms
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=110072810422
http://cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=110072810436

Thanks,

Reply to this Message

Iridium - 31 Dec 2006 01:11 GMT

> Does anyone know if these parts are compatible? Will the GPM Parts fit
> the Integy arms?
[quoted text clipped - 7 lines]
>
> Thanks,

Well, yes, they will fit, but don't. The stock parts are frankly, better.

Signature

Dan
Formerly DanTXD

Reply to this Message

Doc - 31 Dec 2006 20:36 GMT

>> Does anyone know if these parts are compatible? Will the GPM Parts fit
>> the Integy arms?
[quoted text clipped - 9 lines]
>
> Well, yes, they will fit, but don't. The stock parts are frankly, better.

I would strongly disagree! The most common parts I used to break on my
Savage were the front a-arms and knuckles/uprights until I replaced the arms
with Golden Horizons alu ones and the knuckles/uprights with GPM alu ones.
Haven't broken a thing since then!

Doc

Reply to this Message

Bob - 17 Jan 2007 23:30 GMT

Thanks for your replies Iridium & Doc, I did buy them now waiting for
the delivery. I was sick of breaking the plastic ones.

>>> Does anyone know if these parts are compatible? Will the GPM Parts fit
>>> the Integy arms?
[quoted text clipped - 16 lines]
>
>Doc

Reply to this Message

Doc - 18 Jan 2007 02:40 GMT

> Thanks for your replies Iridium & Doc, I did buy them now waiting for
> the delivery. I was sick of breaking the plastic ones.

I popped about 2 a-arms and 3 uprights before I tossed alu at them. Haven't
broken one since! The GPM uprights have a REAL tight fit on the suspension
pins. If you find that the pin will not go thru the upright, use a dremmel
and lightly sand the pin until it slides in easily. The Golden Horizon's
arms on the other hand were a perfect fit.

pics here: www.danontherun.com/doc

Doc

////////////////////////////////////

>>>> Does anyone know if these parts are compatible? Will the GPM Parts fit
>>>> the Integy arms?
[quoted text clipped - 18 lines]
>>
>>Doc

Reply to this Message

Model Forum / Radio Controlled / Land Models / January 2007

GPM Knuckles & Integy Arms on Savage?