Model Forum / Radio Controlled / Land Models / February 2004

I have a Novak Rooster that is messed up. It looks like it took a bit of
water and corroded. I have cleaned it all up with electrical contact clearer
etc. Just wondering if this is the fuse. Its a small 1/4 white cylinder with
what looks like fuse ends on each end. Its soldered to the upper mini board
and sure looks like a minuture fuse. Its an open circuit with my DMM so it
would appear to be a blown tiny fuse.

What happens is very limited travel of both the throttle and the steering
servo. I'd say less than 20% of normal.

Thanks

Mike