need 1/2 scale (1/24) doors

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

Lyn - 14 Aug 2005 03:02 GMT

I need a bunch of 1/2 scale doors (6 panel) that are
one inch wide. They are too scale of 24" wide doors.

Does anyone know of a source??

And is there a better newsgroup to ask of??

Thanks much

Reply to this Message

Mad-Modeller - 14 Aug 2005 05:03 GMT

> I need a bunch of 1/2 scale doors (6 panel) that are
> one inch wide. They are too scale of 24" wide doors.
[quoted text clipped - 4 lines]
>
> Thanks much

Perhaps the model railroad groups. G-gauge trains scale out around
1/24th +/-. There might be some scratchbuilding supplies for that size
building.

Bill Banaszak, MFE

Reply to this Message

Les Pickstock - 14 Aug 2005 08:24 GMT

>I need a bunch of 1/2 scale doors (6 panel) that are
> one inch wide. They are too scale of 24" wide doors.
[quoted text clipped - 4 lines]
>
> Thanks much

You might have a look at the dollshouse groups!

Reply to this Message

Lyn - 14 Aug 2005 22:13 GMT

Thanks Les,
The dollhouse ng is dead. Mostly spam.

> >I need a bunch of 1/2 scale doors (6 panel) that are
> > one inch wide. They are too scale of 24" wide doors.
[quoted text clipped - 6 lines]
>
> You might have a look at the dollshouse groups!

Reply to this Message

Don Stauffer - 15 Aug 2005 14:34 GMT

> Thanks Les,
> The dollhouse ng is dead. Mostly spam.
[quoted text clipped - 9 lines]
>>
>> You might have a look at the dollshouse groups!

These are not too difficult to scratch if the panels do not actually
have to be relieved to a taper. One can cut a core panel for the door,
then do the raised pieces from stock stripwood. Looks pretty good.
This is common with dioramas used with 1:24 model cars.

Reply to this Message

Model Forum / General / Models / August 2005

need 1/2 scale (1/24) doors