Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / General / Models / December 2006



Tip: Looking for answers? Try searching our database.

found it!

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
e - 19 Dec 2006 16:56 GMT
deciding it was time to finally use the new cores i bought
for my large advents 5 years ago, i pulled out all the stuff
i needed. i had to desolder the woofer to remove it, so i
needed one of my third hands to hold the wires. in it was
the bv 141 fuselage. as soon as i saw it, i remembered
putting it there.
nothing is ever lost...it just hides to make you feel
stupid. off to the paint shop.
Andrew M - 19 Dec 2006 19:02 GMT
>  i had to desolder the woofer to remove it, nothing is ever lost...it just
> hides to make you feel
> stupid. off to the paint shop.<snip>
How did it end up in a position to be there?
e - 19 Dec 2006 19:16 GMT
>>  i had to desolder the woofer to remove it, nothing is ever lost...it just
>> hides to make you feel
>> stupid. off to the paint shop.<snip>
>How did it end up in a position to be there?

i put it there for the glue to dry...
bAM mARGERA - 19 Dec 2006 20:53 GMT
> deciding it was time to finally use the new cores i bought
> for my large advents 5 years ago, i pulled out all the stuff
[quoted text clipped - 4 lines]
> nothing is ever lost...it just hides to make you feel
> stupid. off to the paint shop.

i found it too pedward
http://home.graffiti.net/kohout/
Kevin(Bluey) - 20 Dec 2006 02:39 GMT
>>deciding it was time to finally use the new cores i bought
>>for my large advents 5 years ago, i pulled out all the stuff
[quoted text clipped - 11 lines]
> http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
> ----= East and West-Coast Server Farms - Total Privacy via Encryption =----

plonk

Signature

Kevin (Bluey)
"I'm not young enough to know everything."

bluey69@west.net.com.au

maiesm72@netscape.com - 20 Dec 2006 05:26 GMT
Don't feel too bad, I think we all do it.

I dropped a small but vital part to the Yak-11. I looked all around me
and on the seat. I went through all of the crap on my desk, on both
sides, even above the work table as it popped off while I was holding
it with tweezers.

About an hour after putting the whole thing aside in disgust and going
to make dinner I came back into the office and saw the part from across
the room on the carpet under the chair.

Moral of the story:Get rid of all the crap on and under the work
table!!!

Tom

> >>deciding it was time to finally use the new cores i bought
> >>for my large advents 5 years ago, i pulled out all the stuff
[quoted text clipped - 19 lines]
>
> bluey69@west.net.com.au
e - 20 Dec 2006 14:41 GMT
>Don't feel too bad, I think we all do it.
>
[quoted text clipped - 37 lines]
>>
>> bluey69@west.net.com.au

or remember where you glue
Doug Wagner - 21 Dec 2006 17:32 GMT
> deciding it was time to finally use the new cores i bought
> for my large advents 5 years ago, i pulled out all the stuff
[quoted text clipped - 4 lines]
> nothing is ever lost...it just hides to make you feel
> stupid. off to the paint shop.

E, is that the 1/48th Historic that you got from me?
If so, I'm wondering how it's going together. I've still got one in my stash
that I haven't started yet.
Doug Wagner
e - 21 Dec 2006 20:42 GMT
>> deciding it was time to finally use the new cores i bought
>> for my large advents 5 years ago, i pulled out all the stuff
[quoted text clipped - 9 lines]
>that I haven't started yet.
>Doug Wagner

now, it's the bilek which is the same as the airfix.
i'm not skilled enough for the mpm kit yet, but i will
inform when i do it.
Doug Wagner - 23 Dec 2006 00:17 GMT
> >E, is that the 1/48th Historic that you got from me?
> >If so, I'm wondering how it's going together. I've still got one in my stash
[quoted text clipped - 4 lines]
> i'm not skilled enough for the mpm kit yet, but i will
> inform when i do it.

TIA

Doug Wagner
e - 23 Dec 2006 00:22 GMT
>> >E, is that the 1/48th Historic that you got from me?
>> >If so, I'm wondering how it's going together. I've still got one in my
[quoted text clipped - 9 lines]
>
>Doug Wagner

i jope to learn enough this year.
best of holidays to you and yours.
Doug Wagner - 24 Dec 2006 02:03 GMT
> >> >E, is that the 1/48th Historic that you got from me?
> >> >If so, I'm wondering how it's going together. I've still got one in my
[quoted text clipped - 12 lines]
> i jope to learn enough this year.
> best of holidays to you and yours.

And you as well.

Doug
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2012 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.