 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion Groups General ModelsRailroadsRocketsRadio Controlled Air ModelsHelicoptersLand ModelsWater ModelsModelGeeks.com Contact UsLink To UsSearch & Site Map |
Model Forum / General / Models / June 2008De-Chroming
Can anyone please tell me the best way to de-Chrome plastic parts, I have been told that brake fluid is good, but needs to be handled with care in case it eats the plastic. Any hints and tips would be gratefully received. Thanks in advance. Doug. > Can anyone please tell me the best way to de-Chrome plastic parts, I > have been told that brake fluid is good, but needs to be handled with [quoted text clipped - 4 lines] > > Doug. Hi Doug, A somewhat less caustic method is to mix up some powdered detergent like Tide with water to a consistency a little thinner than toothpaste and soak the part or parts in it for a day or so. The "chrome" should peel or flake off with a little urging from an old toothbrush and warm water. Ol ' 45 > Can anyone please tell me the best way to de-Chrome plastic parts, I > have been told that brake fluid is good, but needs to be handled with [quoted text clipped - 4 lines] > > Doug. === Get an old bottle of mayo and fill it up with good ole household bleach. Drop your chrome parts in it and leave them there for about 24 hours. Should dissolve all of the chrome - not the lacquer used as a smooth surface for the chrome to adhere to. If you still have some chrome attached, repeat the process again and with rubber gloves on and an old tooth brush, brush away the remaining chrome. If there is still some chrome left on the parts, get your trusty No. 11 blade and gently scrape the pesky non conforming chrome off. Works for me all of the time. Good luck. Ray Austin, Texas === : Can anyone please tell me the best way to de-Chrome plastic parts, I have not had any problems with the yellow can of Easy- Off oven cleaner. Apply to one side, let sit over night, repeat to the other side. May require additional applications to get all of the chrome off. Bruce  Signature------------------------------------------------------------------------ "I like bad!" Bruce Burden Austin, TX. - Thuganlitha The Power and the Prophet Robert Don Hughes Super fast & clean: http://www.hangar3.com Check the reviews......... > Can anyone please tell me the best way to de-Chrome plastic parts, I > have been told that brake fluid is good, but needs to be handled with [quoted text clipped - 4 lines] > > Doug. If I am going to paint the part, I do not bother to strip the chrome. I prime with Krylon primer, and it seems to have enough tooth with the metal that it does not peel off with reasonable handling. I then paint over the prime, and have had no problems. Many thanks to all of you for your help in this matter I will give most of them a go and compare the results. I am always impressed by the help given on this message board and would like to thank you all again for your help. Doug. Simple Green. Use full strength. HTH Jon >Can anyone please tell me the best way to de-Chrome plastic parts, I >have been told that brake fluid is good, but needs to be handled with [quoted text clipped - 4 lines] > >Doug. on 6/16/2008 2:38 PM Jon Statsinger said the following: > Simple Green. Use full strength. > I have pieces of model kit that are chromed and have been painted sitting in a tray of Simple Green. They were not needed parts, but some that were painted for testing purposes. They have been sitting in simple green for weeks. I can tell you that they are clean as a whistle, but sill painted and chromed. > HTH > [quoted text clipped - 10 lines] >> Doug. >> SignatureBill In Hamptonburgh, NY To email, remove the double zeroes after @ >I have pieces of model kit that are chromed and have been painted >sitting in a tray of Simple Green. They were not needed parts, but some >that were painted for testing purposes. >They have been sitting in simple green for weeks. I can tell you that >they are clean as a whistle, but sill painted and chromed. ...While I've never actually stripped chrome myself, I've seen others do it, and the catch is that the chrome can't be too thick, and you need to keep the SG slightly warmer than room temperature. IIRC, about 80F will strip the chrome away in about a day or two with no damage to the parts. OM Signature]=====================================[ ] OMBlog - http://www.io.com/~o_m/omworld [ ] Let's face it: Sometimes you *need* [ ] an obnoxious opinion in your day! [ ]=====================================[ > Can anyone please tell me the best way to de-Chrome plastic parts, I > have been told that brake fluid is good, but needs to be handled with [quoted text clipped - 4 lines] > > Doug. Doug, there are plenty of older UseNet threads covering this subject. Here is one: http://groups.google.com/group/rec.models.scale/browse_frm/thread/4c448e2e98752f 24/ed7e46e726e22f7d (or the shorter URL version: http://tinyurl.com/4sqxrn ) Peteski >Can anyone please tell me the best way to de-Chrome plastic parts, I >have been told that brake fluid is good, but needs to be handled with >care in case it eats the plastic. Any hints and tips would be >gratefully received. Castrol Super Clean cleaner/degreaser. Soak over night. Can be reused. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2009 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.