Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / General / Railroads / July 2005



Tip: Looking for answers? Try searching our database.

Norris Yard in service!!!!

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Frank Rosenbaum - 27 Jul 2005 23:58 GMT
!FOR IMMEDIATE RELEASE!
July 27, 2005

The Far Seas Connecting Railroad proudly announces the grand opening of it's
new Norris Yard. The yard is a 7 track hump yard with a half inch drop from
the high point to the bottom of the bowl and a quarter inch rise at the
foot. There are no retarders in place just yet, but only two cars have
rolled the eight feet and out the other end. So far, there are no outside
connections to the yard. The yard switches are controlled by Digitrax DS54's
wired to pushbuttons on panels at each end. The hump is at the north end of
the yard and the tail track is around the proposed helix, while the other
end curves east towards the proposed Lake Port of Michelle's Lee.

The management of the FSC are business men/railfans who purchase used older
equipment and repaint them back to original color schemes that they wore as
new, independent of its original railroad. (So an ex NYC RS3 might up in
Lackawanna colors).

The Far Seas Connecting Railroad, your bridge line from here to there and
everywhere else.
3D@electricrailroad.com - 28 Jul 2005 04:06 GMT
>!FOR IMMEDIATE RELEASE!
>July 27, 2005
[quoted text clipped - 16 lines]
>The Far Seas Connecting Railroad, your bridge line from here to there and
>everywhere else.

Yeahbut, does the cafe next to the yard serve outstanding southern
food?
Frank Rosenbaum - 28 Jul 2005 11:34 GMT
Sure!! The cafe/diner is      Big Johns "House 'o Haggis".
Now owned and operated by Big John's spouse. The building is an art deco
style Hamburger with lettuce and tomato on a bun with an attached kitchen
and added dining area.

>>!FOR IMMEDIATE RELEASE!
>>July 27, 2005
[quoted text clipped - 25 lines]
> Yeahbut, does the cafe next to the yard serve outstanding southern
> food?
mike - 28 Jul 2005 15:16 GMT
Do you have a web site so we all can see your work?

> Sure!! The cafe/diner is      Big Johns "House 'o Haggis".
> Now owned and operated by Big John's spouse. The building is an art deco
[quoted text clipped - 30 lines]
>> Yeahbut, does the cafe next to the yard serve outstanding southern
>> food?
Lt. Kizhe Catson - 28 Jul 2005 15:30 GMT
> !FOR IMMEDIATE RELEASE!
> July 27, 2005
[quoted text clipped - 8 lines]
> the yard and the tail track is around the proposed helix, while the other
> end curves east towards the proposed Lake Port of Michelle's Lee.

A working scale hump yard?  Very cool.  Video!  We want video! ;-)

> The management of the FSC are business men/railfans who purchase used older
> equipment and repaint them back to original color schemes that they wore as
[quoted text clipped - 3 lines]
> The Far Seas Connecting Railroad, your bridge line from here to there and
> everywhere else.

-- Kizhe
Arizona Rock & Mineral Co. - 28 Jul 2005 18:47 GMT
More folks should build a hump yard like you did. I did this with a three
inch drop but with five tracks twelve feet long.Only a few cars coasting
into the first track will make it to the end. The more turnouts the car goes
through, the shorter the rolling distance. For this problem, I feel that
there should be a means for accelerating them ( angled air tubes) would work
best rather than retarders for the long rollers. The short rollers must be
physically moved to the end of the tracks and the long rollers stopped by
hand to prevent smashing into standing cars.I may never automate the hump
yard because it is fun to run it just as it is. Call it a test area as many
other factors control the rolling ability of cars like; quality of trucks,
maintenance, car weight, lubrication and so forth. When all of these needs
are satisfied, then work on automation if you must.

--
Phil Anderson
Up hill slow, down hill fast, tonnage first, safety last.
> !FOR IMMEDIATE RELEASE!
> July 27, 2005
[quoted text clipped - 16 lines]
> The Far Seas Connecting Railroad, your bridge line from here to there and
> everywhere else.
Jim Stewart - 28 Jul 2005 19:00 GMT
> More folks should build a hump yard like you did. I did this with a three
> inch drop but with five tracks twelve feet long.Only a few cars coasting
[quoted text clipped - 41 lines]
>> The Far Seas Connecting Railroad, your bridge line from here to there and
>> everywhere else.

Have you tried making the end of the yard go uphill? It should be enough to
slow down the faster cars. It is easier than working so all cars go the same
distance.

Jim Stewart
Frank Rosenbaum - 29 Jul 2005 02:57 GMT
Yes, there is a 1/8 inch rise at the foot of the yard. Most cars will roll
about 2/3ds of the way.

Video will have to wait till after next week. I am going on vacation, and
when I get back I am hosting my former club for an op session at my current
club and then a cookout at my house. No, sorry, only GVRR and KMRHS members
are invited this time. Maybe in '07 if you come to the Detroit convention
and head west after it I will have an open houe for it.

As for acceleration, my cars don't need it. I am probably going to put some
clear stiff toothbrush bristles between the ties about half way down the
yard to slow the fast cars and not affect the slower ones.

Thanks for all the positive feedback.

>> More folks should build a hump yard like you did. I did this with a three
>> inch drop but with five tracks twelve feet long.Only a few cars coasting
[quoted text clipped - 54 lines]
>
> Jim Stewart
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.