Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / General / Railroads / September 2008



Tip: Looking for answers? Try searching our database.

Help Making Passenger Cars Opaque

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Geezer - 27 Sep 2008 10:08 GMT
I recently got a bargain on some Bachmann Spectrum On30 to try out this
size.  I'm very impressed with this equipment, save for the interior
lighting shining through the light colored car bodies.  I need to put a coat
of silver paint on the car interior as a light barrier.  Does anyone know a
trick for applying this paint and keeping it off the visible edges of the
window frames short of applying liquid mask to every window?  For that much
effort to be able to spray the interior, I might just as well carefully
brush paint the inside walls.  Is there some kind of mini paint roller that
could just roll along the inner wall of the car?  Thanks in advance, Geezer
Puckdropper - 27 Sep 2008 11:08 GMT
*snip*

>  Is there some kind of mini paint roller that could just roll along
> the inner wall of the car?  Thanks in advance, Geezer

A couple ideas spring to mind:
Foam rollers (available at most hardware stores)
Felt wrapped around a dowel (smaller than the foam roller)
Paper towel, dipped in paint and then applied to the inside.

Puckdropper
Signature

If you're quiet, your teeth never touch your ankles.

To email me directly, send a message to puckdropper (at) fastmail.fm

David Nebenzahl - 27 Sep 2008 19:16 GMT
On 9/27/2008 2:08 AM Geezer spake thus:

> I recently got a bargain on some Bachmann Spectrum On30 to try out this
> size.  I'm very impressed with this equipment, save for the interior
[quoted text clipped - 5 lines]
> brush paint the inside walls.  Is there some kind of mini paint roller that
> could just roll along the inner wall of the car?  Thanks in advance, Geezer

You can get a little paint roller kit, with a roller that's 1-1/4" x 3",
 at Home Despot and elsewhere. Don't know if that's small enough to get
inside your car, though.

Signature

 Washing one's hands of the conflict between the powerful and the
powerless means to side with the powerful, not to be neutral.

- Paulo Freire

Ken Rice - 28 Sep 2008 05:21 GMT
>I recently got a bargain on some Bachmann Spectrum On30 to try out this
>size.  I'm very impressed with this equipment, save for the interior
[quoted text clipped - 5 lines]
>brush paint the inside walls.  Is there some kind of mini paint roller that
>could just roll along the inner wall of the car?  Thanks in advance, Geezer

A way to block the light is to line the insides of the cars with metallic duct
tape, or any other suitable light blocking tape.

Signature

Ken Rice -=:=- kennrice (AT) erols (DOT) com
http://users.erols.com/kennrice - Lego Compatible Flex Track,
   Civil War Round Table of DC & Concentration Camp made of Lego bricks
http://members.tripod.com/~kennrice
   Maps of Ultima 7 Parts 1 & 2, Prophecy of the Shadow, Savage Empire,
   Crusaders of Dark Savant & Others.

David Nebenzahl - 29 Sep 2008 00:41 GMT
On 9/27/2008 9:21 PM Ken Rice spake thus:

>>I recently got a bargain on some Bachmann Spectrum On30 to try out this
>>size.  I'm very impressed with this equipment, save for the interior
[quoted text clipped - 8 lines]
> A way to block the light is to line the insides of the cars with metallic duct
> tape, or any other suitable light blocking tape.

Sounds doable, but how do you cut out the window openings? From the
outside, carefully?

Signature

 Washing one's hands of the conflict between the powerful and the
powerless means to side with the powerful, not to be neutral.

- Paulo Freire

Bob May - 30 Sep 2008 06:55 GMT
Actually, any color paint will do the job just fine.  With that scale, you
might also wish to do some seats, etc. for the interiors.  That way, you
will paint the inside walls the right color and then the stuff inside will
stand out nicely.
I'll also note that you really should paint the outside as well as the
translucence of the plastic will soon look odd to your increasingly
discriminating eyes.

--
Bob May

rmay at nethere.com
http: slash /nav.to slash bobmay
http: slash /bobmay dot astronomy.net
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2012 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.