Setting Timing on a Saito

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

bawanms - 24 Dec 2004 21:13 GMT

I replaced a main bearing in my Saito 56 and would like to know if there is
an easy way to set the timing gear and be sure the timing is correct? The
timing gear has a mark on it but once you lower it into place it's hard to
tell if it mated up to the crank properly. My engines runs but doesn't seem
quite right.

Thanks

Reply to this Message

Lyman Slack - 29 Dec 2004 19:35 GMT

Check out the Web Site http://saitoengines.com and/or contact
texasrc@earthlink.net

Cheers -- \__________Lyman Slack_________/
\______AMA6430 IMAA1564___/
\____Flying Gators R/C______/
\__Gainesville FL _________/
Visit my Web Site at: http://www.LymanSlack.com

>I replaced a main bearing in my Saito 56 and would like to know if there is
> an easy way to set the timing gear and be sure the timing is correct? The
[quoted text clipped - 4 lines]
>
> Thanks

Reply to this Message

Model Forum / Radio Controlled / Air Models / December 2004

Setting Timing on a Saito