 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion Groups General ModelsRailroadsRocketsRadio Controlled Air ModelsHelicoptersLand ModelsWater ModelsModelGeeks.com Contact UsLink To UsSearch & Site Map |
Model Forum / General / Models / June 2006Air chuck FOC.
When I got my Herbert Flashcap lathe some years ag now it came with an airchuck fitted. This I took off and fitted standard 3 and 4 jaw chucks. So if anybody can find a use for the old chuck it is free to anybody that can collect. There are a few boxes of softjaws. I still have the air body and the draw bar that went through the spindle. Things need a clean as surface rust is staring to form on the body but should still work. Blackburn area for collection reply via newsgroup, if no interest it just goes to the tip. Adrian > When I got my Herbert Flashcap lathe some years ag now it came with an > airchuck fitted. [quoted text clipped - 8 lines] > Blackburn area for collection reply via newsgroup, if no interest it just > goes to the tip. Shame your oop north! I'd have had it... >> When I got my Herbert Flashcap lathe some years ag now it came with an >> airchuck fitted. [quoted text clipped - 10 lines] > > Shame your oop north! I'd have had it... Where are you, I am about to head to London this week just perhaps! >>> When I got my Herbert Flashcap lathe some years ag now it came with an >>> airchuck fitted. [quoted text clipped - 13 lines] >Where are you, I am about to head to London this week >just perhaps! If not I have to go to Blackburn in the next two weeks. -- Regards, John Stevenson Nottingham, England. Visit the new Model Engineering adverts page at:- http://www.homeworkshop.org.uk/ > If not I have to go to Blackburn in the next two weeks. > -- Hmm am I about to use the groups cynical networking for the 1st time ;-) Lets see what we can do! Wayne... >> If not I have to go to Blackburn in the next two weeks. >> -- [quoted text clipped - 4 lines] > > Wayne... Back from London, now for a while, still wanted? Cheers Adrian >>>If not I have to go to Blackburn in the next two weeks. >>>-- [quoted text clipped - 6 lines] > > Back from London, now for a while, still wanted? Adrian. Yes, if we can get it off your hands somwhow ;-) Don't know if John can pick it up, and then it's a case of getting it from Nottingham.... John? Wayne.... >>>> When I got my Herbert Flashcap lathe some years ag now it came with an >>>> airchuck fitted. [quoted text clipped - 15 lines] > >If not I have to go to Blackburn in the next two weeks. I'm going to Blackburn on Tuesday if that's of any use, but that would only get it to Warrington. Cheers Tim Dutton Dry-Dock Traditional & Modern canal craft repairs Vintage diesel engine service >>Shame your oop north! I'd have had it... > > Where are you, I am about to head to London this week > just perhaps! Adrian I'm in Poole, Dorset. What size is the chuck BTW? Wayne... > Adrian > [quoted text clipped - 3 lines] > > Wayne... Its 6 1/4" or apprx 160 mm Adrian |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2008 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.