Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / General / Models / December 2006



Tip: Looking for answers? Try searching our database.

Aldi's 18 volt cordless drill

Thread view: 
Enable EMail Alerts  Start New Thread
Thread rating: 
Dave Croft - 12 Dec 2006 00:09 GMT
I was considering this for next thursday at £20 with two 18 Volt batteries.
I looked at the brochure & it says the batteries are "1.3 mAH NiCd batteries"
Perhaps I don't talk brochure talk right but this seems to me to be incredibly small.
If I am right in reading this as milli-ampere-hours?
TIA
Signature

Dave Croft
Warrington
http://oldengine.org/members/croft/homepage
http://community.webshots.com/user/crftdv

Dave Croft - 12 Dec 2006 00:24 GMT
I was considering this for next thursday at £20 with two 18 Volt batteries.
I looked at the brochure & it says the batteries are "1.3 mAH NiCd batteries"
Perhaps I don't talk brochure talk right but this seems to me to be incredibly small.
If I am right in reading this as milli-ampere-hours?
TIA  Dave Croft

I forgot to add that it is at
http://www.aldi-stores.co.uk/special_buys/index.html
I tried to ring the helpline & got the response that the number didn't exist.

Signature

Dave Croft
Warrington
http://oldengine.org/members/croft/homepage
http://community.webshots.com/user/crftdv

Guy Griffin - 12 Dec 2006 16:32 GMT
> I was considering this for next thursday at £20 with two 18 Volt batteries.
> I looked at the brochure & it says the batteries are "1.3 mAH NiCd batteries"
> Perhaps I don't talk brochure talk right but this seems to me to be incredibly small.
> If I am right in reading this as milli-ampere-hours?

Yes; it's definitely a mistake, 1.3mAh batteries would power a drill for
about a second before running flat. These types of battery pack are made
of 'Sub-C' sized cells from 1Ah to 2.4Ah, even up to 3.8Ah for RC
models. Buying tagged cells & soldering them is a lot cheaper than
getting new battery packs...
Mark Rand - 12 Dec 2006 01:17 GMT
>I was considering this for next thursday at £20 with two 18 Volt batteries.
>I looked at the brochure & it says the batteries are "1.3 mAH NiCd batteries"
>Perhaps I don't talk brochure talk right but this seems to me to be incredibly small.
>If I am right in reading this as milli-ampere-hours?
>TIA

I had a laugh at that as well. Lidl had some similar ones, but with a 1.5mAhr
capacity :-)

Annoyingly, The Lidl ones looked to be the same as the one that I got from
them a year or two ago but didn't seem to be showing spare batteries, I could
have done with some new batteries for mine, since all three sets are at the
end of their life. I'll probably pay Aldi a visit instead

Mark Rand
RTFM
Tony Jeffree - 12 Dec 2006 06:31 GMT
>I was considering this for next thursday at £20 with two 18 Volt batteries.
>I looked at the brochure & it says the batteries are "1.3 mAH NiCd batteries"
>Perhaps I don't talk brochure talk right but this seems to me to be incredibly small.
>If I am right in reading this as milli-ampere-hours?
>TIA

Considering that the NiMH "AA" cells I use for camera flashguns are
rated 2400 mAH, I suspect that they have put the decimal point in the
wrong place. 1.3 AH sounds nearer the mark.

Regards,
Tony
Tony Jeffree - 12 Dec 2006 06:37 GMT
Looks like there are a couple of other interesting items there - the
"combi tool" with flexible drive for 15 quid sounds interesting. Not
sure about the 15 piece stone drill set "...made from high quality,
sandblasted carbide steel..." can't say I have come across that
particular exotic material before...

Regards,
Tony
ravensworth2674 - 12 Dec 2006 08:22 GMT
Last time round, this Forum brought out notices of these tools.
I bought the drill drill, the smaller bits and bobs and wirring sanders
and accessories.
With fading memmmmm(?) I spent about ?80( tite arsed git) and apart
from one of the small drills which was really weak, I felt more than
delighted- until my son buggered off with most of them to decorate his
flat. He's a snotty nosed so and so and I thought that my ropey tools
would be beneath him. Full of praises!

Regarding Aldi, five years ago I bought a battery drill in from them in
Garmish Partenkirchen.
It is still in use.

My considered opinion is that the Aldi, Lidl and Netto sources are
excellent. No one is going to get top top quality but there is no doubt
that if you are short of a tool and work off the principle of a tool
which will do the job- perhaps end of tool. Buy it and be surprised.

Digressing- it's Christmas. Lidl flogs excellent French wines. I have a
house in France and the locals flock their. Nuff said?

Cheers

Norm
John Stevenson - 12 Dec 2006 09:57 GMT
>Regarding Aldi, five years ago I bought a battery drill in from them in
>Garmish Partenkirchen.
[quoted text clipped - 3 lines]
>
>Norm

I bought the same drill but mine was in Blue Plastic
--
Regards,

John Stevenson
Nottingham, England.

Visit the new Model Engineering adverts page at:-
http://www.homeworkshop.org.uk/
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread
Enable EMail Alerts
Rate this Thread



©2012 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.