 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion Groups General ModelsRailroadsRocketsRadio Controlled Air ModelsHelicoptersLand ModelsWater ModelsModelGeeks.com Contact UsLink To UsSearch & Site Map |
Model Forum / General / Models / September 2010Ainjest
Does anybody have any operating information on the Ainjest attachment? If it's ready scanned that would be great but if you only have "hard copy" then I'd borrow, copy and return it. Thanks Charles On 12 Jun, 22:31, Charles Ping <charles.p...@littlewrongs.org.uk> wrote: > Does anybody have any operating information on the Ainjest attachment? > If it's ready scanned that would be great but if you only have "hard [quoted text clipped - 3 lines] > > Charles I'll dig mine out, scan it and email it to you. Bob >On 12 Jun, 22:31, Charles Ping <charles.p...@littlewrongs.org.uk> >wrote: [quoted text clipped - 9 lines] > >Bob Thanks Bob Charles Hello Bob or Charles, Today, I am in desperate need to get a copy of the Ainjest operating manual. It has worked excellent for over 15 years, but today it is not following the exact thread it just made, so that it wipes out the last pass it made... Does anyone have an idea, as to what the problem is ???. I cleaned the lead screw and brass follower to no avail, and the follower seems to be adjusted properly... Thank You Very Much, Carl >>On 12 Jun, 22:31, Charles Ping <charles.p...@littlewrongs.org.uk> >>wrote: [quoted text clipped - 5 lines] > >Charles Hello- I was looking for some information on the Anijest and found this message. Would you do me a favor and e-mail a copy of the manual to me also. Thanks Is there some way I can send you a private e-mail thru this board with my e- mail address? Fred White ******************************************************************** >On 12 Jun, 22:31, Charles Ping <charles.p...@littlewrongs.org.uk> >wrote: [quoted text clipped - 7 lines] > >Bob Hello Bob or Charles, Today, I am in desperate need to get a copy of the Ainjest operating manual. It has worked excellent for over 15 years, but today it is not following the exact thread it just made, so that it wipes out the last pass it made... Does anyone have an idea, as to what the problem is ???. I cleaned the lead screw and brass follower to no avail, and the follower seems to be adjusted properly... Thank You Very Much, Carl >On 12 Jun, 22:31, Charles Ping <charles.p...@littlewrongs.org.uk> >wrote: [quoted text clipped - 7 lines] > >Bob Have just bought an Ainjest attachment but it needs some work on it . Would very much appreciate a copy of the operating instuctions and any other relevant information. I propose to modify this attachment to fit a Smart & Brown 1024 lathe. Len. vwcabriolet1971[at]googlemail[dot]com >On 12 Jun, 22:31, Charles Ping <charles.p...@littlewrongs.org.uk> >wrote: [quoted text clipped - 7 lines] > >Bob |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2012 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.