 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion Groups General ModelsRailroadsRocketsRadio Controlled Air ModelsHelicoptersLand ModelsWater ModelsModelGeeks.com Contact UsLink To UsSearch & Site Map |
Model Forum / General / Models / May 2010Clarkson Radius Grinding Attachment
I have just aquired a Clarkson radius attachment for the tool and cutter grinder, does anyone have any instruction leaflets for setting one up which I could buy or maybe copy. Thanks Phil >I have just aquired a Clarkson radius attachment for the tool and >cutter grinder, does anyone have any instruction leaflets for setting >one up which I could buy or maybe copy. >Thanks >Phil Which grinder, Phil ? We have a handbook for the Mk1 T&C Grinder, and you can still get the instruction books etc from the people who took over the grinder manufacter from Clarksons. Peter -- Peter A Forbes Prepair Ltd, Luton, UK prepair@easynet.co.uk http://www.prepair.co.uk >I have just aquired a Clarkson radius attachment for the tool and >cutter grinder, does anyone have any instruction leaflets for setting >one up which I could buy or maybe copy. >Thanks >Phil Phil There's a page or two on setting it up and using it in the Clarkson manual. I can email you scans if you want? Charles Hi Charles & Peter I already have the Clarkson book thanks, I saw a specific booklet on the radius attachment on ebay a few months ago, but did not buy it as I didn't have the unit then. I am sure I will figure it out without the book, but it would be nice to have a copy on file though. I will be using it on my "Union" grinder by the way. Thanks Phil > >I have just aquired a Clarkson radius attachment for the tool and > >cutter grinder, does anyone have any instruction leaflets for setting [quoted text clipped - 9 lines] > > Charles > I have just aquired a Clarkson radius attachment for the tool and > cutter grinder, does anyone have any instruction leaflets for setting > one up which I could buy or maybe copy. > Thanks > Phil March Engineering who made the Clarkson grinders are in receivership.Their assets are being auctioned in the very near future.There are some complete grinders and attachments listed and if you managed to go on the viewing day you might pick up some literature. regards,Mark. >> I have just aquired a Clarkson radius attachment for the tool and >> cutter grinder, does anyone have any instruction leaflets for setting [quoted text clipped - 8 lines] >literature. >regards,Mark. Mark Do you know who's running the auction? Thanks Charles >> I have just aquired a Clarkson radius attachment for the tool and >> cutter grinder, does anyone have any instruction leaflets for setting [quoted text clipped - 8 lines] >literature. >regards,Mark. Ah, that explains why I couldn't get hold of them and their website was down last week. Have you got any dates for the auction ? Peter -- Peter & Rita Forbes diesel@easynet.co.uk Engine pages for preservation info: http://www.oldengine.org/members/diesel >>> I have just aquired a Clarkson radius attachment for the tool and >>> cutter grinder, does anyone have any instruction leaflets for setting [quoted text clipped - 11 lines] >Ah, that explains why I couldn't get hold of them and their website was down >last week. It's working today http://www.march-engineering.co.uk/march.htm Cheers Tim Tim Leech Dutton Dry-Dock Traditional & Modern canal craft repairs > March Engineering who made the Clarkson grinders are in > receivership.Their assets are being auctioned in the very near > future.There are some complete grinders and attachments listed and if > you managed to go on the viewing day you might pick up some > literature. > regards,Mark. That would explain their lack of response to my e-mail asking for literature. I am still having no luck tracking one down. Phil > > March Engineering who made the Clarkson grinders are in > > receivership.Their assets are being auctioned in the very near [quoted text clipped - 8 lines] > > Phil Phil, Copy of booklet sent by email as .pdfs - ( 'twas I who bought it on eBay !) Andrew Mawson Andrew Is there any chance that I could get an email with tha booklet in it? Regards Wil -- Will Bleeke > Andrew > Is there any chance that I could get an email with that > booklet in it? > Regards > Will You have mail ! AWEM Hello Andrew, This is a long shot, as I've only just seen your posting that lead me to this site, I've obtained a Clarkson Mk2 Radius grinding attachment without any instructions, again I have the Cutter Grinder Manual, which has a half page illustration of said equipment. I would be very willing and able to contribute for a copy of your manual, whichever way is convenient to you. Best regards, rotorhead (Bernard Wright - bernard@bcrw.net) >> > March Engineering who made the Clarkson grinders are in >> > receivership.Their assets are being auctioned in the very near [quoted text clipped - 7 lines] > >Andrew Mawson Andrew, Can't find it anywhere can you resend it t wbleeke@acenet.com.au Regards Wil -- Will Bleeke |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2012 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.