 |
 | Home | Contact Us | FAQ | Search & Site Map | Link to Us |
 | Sign In | Join | Other 45 Sites in Network |
| HomeDiscussion Groups General ModelsRailroadsRocketsRadio Controlled Air ModelsHelicoptersLand ModelsWater ModelsModelGeeks.com Contact UsLink To UsSearch & Site Map |
Model Forum / Radio Controlled / Water Models / April 2009Re: Solder Help
Ensure you apply the Flux on the Flex Drive and Inside the Ferrell. You also must use a Propane Torch (Sears) to produce the necessary heat. This is critical. I just did this for the first time two weeks ago when finishing my scratch built boat. It worked perfectly.  Signaturepcmww1 Free RC Model Boat Plans: http:\/\/www.modelpowerboat.com\/forum\/downloads.htm There is another way... see http://www.offshoreelectrics.com/info-pages/assemble-shaft.php I used this method on a 12 cell rigger putting out 750 watts and have had no problems to date. Randy > Ensure you apply the Flux on the Flex Drive and Inside the Ferrell. > [quoted text clipped - 3 lines] > I just did this for the first time two weeks ago when finishing my > scratch built boat. It worked perfectly. |
Reply to this Message |
 Sign In
 Join
 My Latest Posts My Monitored Threads My Blog My Photo Gallery My Profile My Homepage Start New Thread Enable EMail Alerts Rate this Thread
|
©2012 Advenet LLC Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.