Robbe Comtesse Instructions

Thread view:

Enable EMail Alerts

Start New Thread

Thread rating:

sander.bijl@gmail.com - 31 Oct 2005 11:19 GMT

Hello all,

As a somewhat experienced builder, I decided to move over to the
sailing business: I recently became the proud owner of an assembled
Robbe Comtesse. The hull was somewhat damaged, but I managed to fix
that quite well.

But I'm running into a little problem: My ship did not come with an
instruction. I just got the boat and the fitting set, and that was all.

Is there a way in which anyone can help me obtian those instructions?
Or point me in the right direction?

Thanx in advance for your time!

Sander
The Netherlands

Reply to this Message

A.T. - 01 Nov 2005 01:40 GMT

Some information at
http://www.rchobby.co.uk/robbe_sailing-boat_comtesse.html
A lot of model boat building, running and sailing information for non RC
and RC electric, gas, sail and steam ships etc available at Alan's Hobby,
Model & RC Web Links
http://homepages.ihug.co.nz/~atong/
sub section =
Boats, Yachts, Submarines, Warship Combat and Nautical reviews
especially under
"Reviews, Plans, FAQ & Tips, Jet drive."

Billing Model Boats - Construction tips & Paint cross reference
FAQ - Ship Models
Boating Rope Knots - animated examples
Fishing Knots & Rigging - animated examples
Fitting servos to yachts, boats_ amend Servos to operate 180 or 360 degrees
How to Sail fast_ Rig tuning by Bob Sterne
Jet drive units (KMB)
Model Builder Tips & Tricks - Art of the Model Builder
Model testing - instrumentation, scaling laws, test tanks, wind tunnels,
experiments
Props & Shafts - & many other builders tips.***
RC Laser RC Sailboats - Tips and Tricks
RC Sailboat FAQ
rcboat.com - RC Website for the RC Racer. Home of The Engine Analysis Softwa
River boats,Towboats etc. - Old River Bill's RC***
River Boats, Towboats etc - Towboat Joe.
Tips, Set Up Info & Projects - Off shore electrics

regards
Alan T
Alan's Hobby, Model & RC Web Links
http://homepages.ihug.co.nz/~atong/
.................................................................

> Hello all,
>
[quoted text clipped - 13 lines]
> Sander
> The Netherlands

Reply to this Message

Model Forum / Radio Controlled / Water Models / November 2005

Robbe Comtesse Instructions