Model Forum

One of our engines has a new flywheel that we had cast and machined some 10
years ago, but we always suspected that the keyway was not right, but as it
wasn't in use, it was left under its sheet to slumber the years away.
We are just reviving it, and the question of the keyway has ...

Does any one have a guide to the maintenance stenciling on an early (silver paint/bare metal) F-105D?
TIA,
Curt
KVPS

http://www.youtube.com/watch?v=Roa1ei6Lm-s
Craig

http://shop.ebay.com/the_plastic_mouse/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksi
d=p4340
Thanks for looking.
Mouse

I have a source of Extruded L111 Aluminium plate. (Aircraft quality)
Size 30mm thick x 325mm wide x 1000mm long.
Price £60 each if anyone is interested. Based on Density they are
about 24Kg each so carriage would not be cheap. Colleague having one

eBay item 200447916714 (no relation - I would not be selling).
Feeling rich, punk ?
David

(no, not the pachinkonudenoodleparlour nakedopiumlash kind)
Looking for vises for two milling machines, an X3 and a smaller BCA. Any
tips?
For instance, what size - what kind, would a good drilling vice do or do

Has anyone on the list got a Schaublin 13? I would be very interested
to hear what this type of mill is like to operate. Good points and
bad. My main interest would be its use as a vertical mill as opposed
to horizontal.

Several years ago (maybe as much as 15) my wife and I were traveling through
Pa. on I 76 and stopped at a very large layout. Several thousand sq feet. I
tried to google it to find it, but have had no luck. Does anyone remember
the name of it or if it was still there? I think it ...

The Hornby magazine has and article on the attempt. It refers to the stolen
batteries and transformers but it refers to ill-spirited members of the
public sabotaging the line.
Exactly what did they do?

Not got the full list but the following look to be in Bachmann's plans:-
LMS 3F 0-6-0 & tender
S&D 7F 2-8-0
BR Derby Lightweight dmu (assume class 108)

Having settled on the Hornby Elite and Bachmann DCC Chip as my
affordable combination it was now time to sort out some of the odd
happenings.
Several chips have been returned due to non response but there has

I recently had the privilege of taking photos at Seaboard Southern's
Crawley, UK (near Gatwick airport) headquarters. They are certainly
making considerable progress with their layout.
Pictures start here  http://mikehughes627.fotopic.net/p63544849.html

Sorry for me bad English.
I am looking for a better drive for the old MDC BOXCAB diesel.
Does one have an idea there? Web pages?
Could the drive match and work of a Bachmann diesel (GE 44)?

What do people think of Hornby's "R2706   GWR "The Flying Dutchman"
Train Pack"?
I'm particularly interested in pre-1900 prototypes, but I've only seen
pictures of this model.

where can I get 00 gauge spuds for narrow gauge projects
or drive units of a similar 4 wheel arrangement?
thanks Mike

The March update is available here: www.vernarockets.com
Verna & Randy

Archive-name: model-rockets/intro
Rec-models-rockets-archive-name: rockets-faq/part00-intro
Posting-Frequency: weekly
Last-modified: 2002 May 29

Hello the group!
Since the BATF(E) has relinquished control of the use of APCP, how many
out there still use Hypertek Hybrids?
It has been a while since I was on this newsgroup and I do not see much

Hello Guys, I have a scratch built design of mine, however I cannot
get it to string test for proper CG (I think the fins are in the way)
any ideas? Is there a rocket out there that looks similar I can use as
a guide? Its ready to go except for the finish. If all else fails I

Archive-name: model-rockets/intro
Rec-models-rockets-archive-name: rockets-faq/part00-intro
Posting-Frequency: weekly
Last-modified: 2002 May 29

Archive-name: model-rockets/intro
Rec-models-rockets-archive-name: rockets-faq/part00-intro
Posting-Frequency: weekly
Last-modified: 2002 May 29

Cesaroni Technology Incorporated is developing a 24mm motor line.  It should
include composite "E" and maybe "D" motors.
http://www.pro38.com/products/pro24/pro24.php
Misha LeBlanc

Is it possible to purchase engines that only have the ejector/igniter
component? I'm looking for a zero-downthrust system to eject a
parachute from a UAV should a system failure occur in flight.
Any tips on the details of the system would also be appreciated;