Model Forum / Radio Controlled / Air Models / September 2003

I am moving to the Salt Lake City, Utah area and I would like to learn a
little more about the clubs with flying fields in the area.  I checked out
some of the web sites, but I would like some additional information on the
"style" of flying at each.

What exactly do the abbreviations stand for?
D

Engine...Enya 19 with original CO2 bottle muffler.
Intention.. to make it quieter.
Muffler was unscrewed and a piece of aluminium tubing was fastened
between the two halves. This just about doubled the exhaust chamber size

Does anyone know where i can get long servo horns from for  Hitec servos??
Pete Tindal's airplanes have them for JR & Futaba but not Hitec.
TIA John.

here it is:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=3145965830
you know you want it!

Where is the good place to buy speed controllers and chargers.
Thanks
Hai Pham

** newbie alert **
Hi,
On a family visit with my kids to a toyshop I was quite impressed by one of
the toys there and walked out with it for the kids (ie my) enjoyment, namely

----- Original Message ----- From: <FJetten@aol.com>
To: <undisclosed-recipients:>
Sent: Wednesday, September 10, 2003 3:12 PM
Subject: ACCIDENT at OCEAN SPRINGS RC FLYING FIELD...

This may seem an odd request for this group, since my application is
different than in my R/C aircraft.   But I want to build the simplest,
least complex signal generating source to feed one of my old retired
servos, to make it move either in response to a potentiometer, or even

I posted 3 photos of the covered model to alt.binaries.radio-control this
morning.
I think it looks really good.  I'm anxious to see it in the air.
---------

Well, after working on it now for about three weeks so far, I am happy to say
that I am finally about half way through the building of my Dynaflite "Piece O'
Cake" motorglider, and I really must say that I am enjoying this project
enormously.  I started out with one package of five ...

Can't find any reference to the CofG for the 30% Glen's Cap.... anyone know
where it's supposed to be?
Cheers,
--

Found a camcorder case to hold my transmitters but need new foam inside.
Went to a fabric store and WalMart but no luck, any suggestions would
be appreciated, looking at a gun shop this week for some.
Thanks

HI all - what the best post-run maintenance for a 2 stroke engine after a
run? Thanks again...