Model Forum / Radio Controlled / Air Models / September 2003

Hi all, I am in the middle of building my new GP Ultimate Bipe and was
wondering which engine will give it the best performance. The instructions
call out for a 40-46 2C or a 48-70, I am not too well versed in the power of
4C engines soooo,  I was wondering if somebody out there who ...

I would like to replace the bearings in my old 46SF engine but I can't seem
to dislodge the drive nut off of the drive shaft. Have tried heating the nut
but it won't come loose. Without purchasing and using a small wheel puller
does anyone have any ideas how to remove the drive nut?

Our club is sponsoring the 2003 US Scale Master in Dayton, Ohio. I'm
printing apparel and have put together a logo for the shirts and hat.
However, I need a 1903 Wright Flyer file that is in vector (line art)
format for the printer. This could be in a Corel Draw, Illustrator.

Does anyone know of a good Jamara stockest !!!
Cheers !

As header tomorrow.
RADMAC Flyin anyone going?
"B" certs only!
JB

Are you caught up in all the frustrations about RCU? Like you I feel Marc
has taken a good thing and made it worthless so instead of continuing to
complain about it I'd like to point you in the direction of some other RC
forum websites that are out there for your enjoyment. These ...

Hi people, im very new to RC and flying.  Just got a firebird XL and
its flying very well.  The only problem is the fly time.  I dont
really want to spend money on a new battery pack, so the question is:
Can i make a tow line (elastic etc) tow the XL up and then glide and

It is actually a real shed not a model one!
But anyway, I've just got me a 10'x6' shed to keep the planes and gear in.
I want to insulate it and put a lining in it,
What do you experienced (with insulating sheds) guys recommend for

Ok almost got a 90 inch Cub built and am trying to decide between a
Saito 100 or a Saito 120?  Any comments?

Has anyone flown a Tiger Stick before i am thinking of getting one of these planes for my next plane.
Any feedback would be grateful.

Hey you giant scalers, got a question for you. I have an 84" Laser 200 wing
from a scratch built Laser I put together some time ago. The fuse and tail
feathers are long gone. Still have the engine (Quadra 35). I was just
thinking of making a profile fuse for the wing but was ...

Engine... Enya 19
Original muffler... CO2 shaped muffler that came with it.
Engine 15 yrs old but only run a few times before original owner packed
up model aircraft.

So after many years in the hobby, my son and I are about to buy an air
brush.  My intention is to recover some warbird ARFs I have been
flying a few years and paint them.  He also wants to paint plastic
models.  The question is about learning the basics.  Our plan is to

Hi ppl im making an rc hovercraft for a skool project but i need sum help
deciding on motors i need one motor for downthrust which will run a 7inch
3blade prop and the forward thrust will hav a 8inch 2 or 3blade prop on any
ideas on what motor to use it must be a 7.2v cheap as ...

I have a GP Supersportster 40 and an extra set of wings.  Would it be
possible to add the extra set of wings and make a bi-plane out of it?
I am not positive I would have working ailerons on the extra set, but
would it work?  I am asking because I found a sportster bi-plane kit