| Thread | Last Post | Replies |
|
| leaving hobby, still have stuff for sale.. (ottawa) | 30 Nov 2003 23:58 GMT | 4 |
.010 Teedee (with tank mount) .049 Baby Bee .049 Tee Dee (with tank mount) .10 LA blue OS (new)
|
| Which prop? | 30 Nov 2003 23:42 GMT | 39 |
I'm buing a O.S FX 46 and I'm wondering which prop to use. 11X6 11X7 12X6 or whatever. Which gives most speed/acceleration? Or what do you guys prefer? Stefan
|
| JR. 8103 Setup Question. | 30 Nov 2003 22:54 GMT | 7 |
Anyone familiar with the 8103. I'm setting it up for my tiger two that'll have one flap servo ( I insttalled flaps) and two aileron servos. Instead of using a Y connector I'm Plugging the left aileron into the aileron channel and the right aileron on channel 5 (gear). I got it to ...
|
| go on, treat yourself | 30 Nov 2003 21:40 GMT | 3 |
http://www.supermarineaircraft.com/ Order me one too, eh? David
|
| Electric Engine Operation | 30 Nov 2003 14:55 GMT | 7 |
Took my new Zagi out for the first time, after turkey dinner on Thursday, to try a gentle glide and check balance and trim without power as described in the instructions. Made the mistake of leaving the dog (80 lb black lab) untethered.
|
| Wright Brothers Plane, power, 1903... | 30 Nov 2003 14:22 GMT | 2 |
I'm lookin for some plans for the wright flyer say 6 to 8 ft wing span...Nova's progam was great
|
| Making cowl from scratch | 30 Nov 2003 13:24 GMT | 7 |
Hi, can you guys give me some advice on making cowls from scratch? I'm not sure what's best; wood, fiberglass or --fill in the blank--. I have a Midwest zero kit (40-size) that has been buildt from scratch, but I guess it's difficult to find a replacement cowl for it. I don't even ...
|
| Oldest plan??? was: Old free flight plan | 30 Nov 2003 13:14 GMT | 1 |
The request for an old free-flight plan has started me wondering what the oldest plan (free flight or otherwise) is, that anybody in this NG has. I will start the ball rolling with a plan I have for building 3 "Model
|
| Great Day ! | 29 Nov 2003 22:10 GMT | 3 |
Like you guys to share in a great day with our diggers at our Club today - http://www.geocities.com/peabodypenguin/ Good day too, for the BBQ and other refreshments, on what was a fairly hot and humid day in Oz land.
|
| Dave check this out- and look at the videos- | 29 Nov 2003 21:11 GMT | 3 |
here's the address: http://www.rctoys.com/draganflyerxpro.php - remember, I'm on your side... Paul
|
| Small Scale Park Flyer | 29 Nov 2003 19:40 GMT | 14 |
Small 18inch park flyer. I have been flying this for about 3 years now. they stop all flying activity at the flying field when I bring it out. it will doo loops, barrel rolls, and spins. http://brocktech.tajinc.org/lazy_bee.htm
|
| Ham antenna for Radio or GWS Corsair | 29 Nov 2003 16:32 GMT | 1 |
I'm lookind to trade a Cushcraft ARX-270 Dual band Ringo 9 DB gain on 144 and 12 DB gain on 440. it have the N connector on it. It's 4 years old in great shape. The only thing wrong on it is the paint is peeling on the fiberglass mast but it dosn't effect it's performance.
|
| Hand-starting tips for an Irvine 39? | 29 Nov 2003 16:06 GMT | 12 |
Hi, trying to hand-start my Irvine 39. I have no R/C experience. The advice I've been given is as follows: Needle valve open 2 turns. Thumb over carb. Full throttle. Turn prop 5 times. Thumb off carb. Turn prop 5 times. Throttle open a crack. Attach
|
| Toledo 2004 | 29 Nov 2003 14:50 GMT | 2 |
Does anyone know the dates of the forthcoming Toledo RC show? TIA.
|
| z connector | 29 Nov 2003 14:04 GMT | 3 |
Anyone know where I can get info on using a futaba servo with the new airtronics rx?
|