Model Forum / Radio Controlled / Air Models / November 2003

In several messages around various forums and message distribution systems,
there seems to be a trend to blame the Clubs with some failure to report their
positions of activity to emergency unit response systems.
The recent Heli accident happened at Harris County, TX, Tom Bass Park, ...

Ok, I've torn my 91 Surpass down and have gotten
new bearings and a new piston ring. Now I need to
figure out how to time the valve train. I know the
piston needs to be at TDC and I can see the mark

All those construction tips about building light caused me to re-assess my
glue habit. I love to lay on the epoxy  which makes for a more prang-proof
model. I decided to put my most recent model (920 sq. inch wing area) on a
scale and found it to be 6 ounces over the HIGHEST ...

Hi all . . .
If you ever wanted to know what flutter is, have a look at
http://www.airandspacemagazine.com/asm/Web/Site/QT/TCFlutter.html
There are several videos showing various types of flutter, including

ANyone ever heard of one of these?  Or did I just get taken?  Eddie Fulmer

HI all, looking for online r/c videos to watch, cant seem to find many
know of any good pages?

What's your worst-best story?
--
KayCee
Foamie Experimentation Engineer

For those of you enthusiastic about Spitfires (I dare you to say you are not
enthusiastic)
this may remind you about your own low flying. This footage has been around
for some time I'm told.

Can anyone suggest the best prop for a MOKI 2.10
Will the motor work with a Perry VP-30 fuel pump and Perry carb?
Thanks,
Stuart

Here is a hippotheoretical question. :)  Say your club only allows 50
members because of limited space and the property owner wants it only to be
50 people.  Only about 20 of them fly regularly.  About 10 of them almost
never show up at all to fly.  Say you even have a couple guys ...

Anybody an idea for a Saito .91 4s
(ARF)
What do I want to do with it:
Knife-edge loops, Roling loops, hover, slow rolls.

I am looking into starting up RC flying.  One option
is to purchase the G2 program and practice at home.
Another is to do park fliers just as the Aerobird.
Of course I could do a full blown trainer like Hanger 9

I have a new scratch built plane that with space(real tight) for a six ounce
tank but I realized that I cound fit two 4 oz tanks in much easier.
Can I connect the exhaust (pressure tap) line to tank 1 and its output to the
pressure input on tank two.  Tank two output would go to the ...

My electrical understanding of art ranges between zero to nil.
So will a coreless servo rated for a six volt battery work satisfactorily
with a 4.8 rx battery.? Some additional information to confuse the answer,
should there be one.