Model Forum / Radio Controlled / Air Models / December 2003

I want to create  ATV on a skysport 4 (throttle).  Any suggestions how i can
do this. I want to adjust it so mechanical solution isn't what i am looking
for.
 I am guessing i will need to put a small pot across the pots inside the

Recently at our club we have been having some discussions about the
appropriate Futaba servo type to use in out 40 - 53 size models either
a 148 or 3001. Some folks swear by the 148 others the 3001.
I've looked at the spec for Futaba 148 and 3001 servers both seem to

I hear that RCV four strokes are the quietest. Is this true? I am also
interested in any 2stroke/muffler combos that are relatively quiet.
The quietest 4 stroker I had was an OS 91 with a 14x9 prop, probably
because the prop turned at a relatively low rpm.

i make engines under 500$ starting at5by10cm

Good Evening, All,
Just a quick note to ask about the RCM Staggerwing plans.  Has anyone seen
this set of plans?  I am looking for a true scale Staggerwing and would like
to do retracts as well.  Can anyone point me to any plans from anyone other

boring aint it

I've been following the thread about "cheap turbines".  My question is
"why are turbines so expensive".  When you look at the components,
they seem simpler in some respects to gas/glow.  Is it simply because
they are relatively new and none of the big engine companies (eg, OS,

Other than the colors, and the obvious differences in the windows, and turtle
top, can it be done with the the Great Planes Cub 60 kit?
I want something other than the typical "yellow" cub.
How bout some three view pics on the L-4, I can't find any really good pics

Has anyone purchased this RC Parachutist or know anything about it.  I heard
a rumor that I am getting on for Christmas.

I'm building an electric Zagi and most of the online building guides and
tips recommend applying SPACKLING to the wings before covering.
I've never heard of this before.  Is it an American term?  What is it in UK
and is it worth doing?

I anyone has a new OS 40FP to sell, email me at twinster2@aol.com
Thanks Don

Anybody know which 4 stroke in the .50+ size is the shortest? From the face
of the thrust washer to the end of the crank case. I'm going to buy a new 4
stroke for a new project, (Monocoupe 90) I'm looking at the Saito .56, OS
.52 and Enya .53. I need to move the firewall aft and ...

When it comes to a TX and related RX and servos, what would you recommend as
a good brand?
I realise most brands are arguably just as good as the next but.........
I'm looking at buying something with a min of 5 channels new or second hand.

I put a 370 size motor in mine and run a lithium poly pack. It will almost
loop when you apply full power. I also replaced the radio gear with 72mhz
equipment.
What a difference.

Contact my at 563-3634 or remove the X's from my email.
I'm in the Ottawa Canada area.
I've also listed this stuff at the local community Web site for RC
www.Calmdays.com.