| Thread | Last Post | Replies |
|
| looking for small electric info | 13 Jan 2004 19:11 GMT | 2 |
I built a Pipsqueak from RCM plans and put a Cox Peewee .020 on it. This plane has about a two foot wingspan. With a micro receiver, two Hitec 55 servos and a 400 mah nimh receiver battery, it weighs 6 ounces. The Peewee .020 provides just the right amount of power, but
|
| U/S for the DH Mosquito? | 13 Jan 2004 16:40 GMT | 3 |
Hi, I'm searching for construction plans for u/c for the DH Mosquito or DC3 (They are pretty much the same principle?) Please answer directly to my mailbox. BR, Sigurd
|
| Astro Hog to Hog Bipe? | 13 Jan 2004 14:50 GMT | 3 |
How difficult it would be to convert an old, already-built Astro Hog into its bipe cousin? I realize new wings would be needed as the bipe's wings are both shorter and thinner, but what else would I be getting into? --
|
| Suggestions on old trainer? | 13 Jan 2004 11:33 GMT | 23 |
Hey all, Mike the newbie here. I just scored an old (err, maybe 80's or 90's vintage) .40 sized trainer plane from a friend. Long story short, His friend gave it to him when he moved on to bigger and faster planes. My friend gives it to me because he's too chicken to fly it. ...
|
| trimming | 13 Jan 2004 09:38 GMT | 5 |
can someone please tell what trimming the plane means thanks joe
|
| Crashed Saturday | 12 Jan 2004 23:21 GMT | 4 |
Saturday was my first time out in a couple of months. Last time, the nose gear broke out part of the firewall on a bad landing. We decided to convert the plane to tail dragger while it was down. The plane is a Global Right Flyer 60H.
|
| Tucano 30" from RCM&E June 2001 | 12 Jan 2004 23:17 GMT | 2 |
Can someone please help I need to know the C of G for the Tucano. I built it a while ago and have since lost the plans. Thanks
|
| Installing receivers and fuel tanks??? | 12 Jan 2004 22:32 GMT | 15 |
Whats the best way for holding them in place??? thanx, ken
|
| Himax 2025-5300 | 12 Jan 2004 20:47 GMT | 2 |
Is anyone using this motor. More specifically is anyone in the UK using this motor. I have just bought one to use with a Phoenix 25 esc. I will be driving an 11x4.7 GWS slowfly prop though a GWS 6.6x1 gearbox. I am hoping to get 40oz static thrust on a 12 oz auw foamy plane.
|
| Question about hinge slot cutting... | 12 Jan 2004 20:44 GMT | 19 |
best way to cut them...should I invest in a Great Planes Slot Machine??? Other models??? Thanx ahead of time, ken
|
| CG adjustment? | 12 Jan 2004 20:32 GMT | 6 |
My case is: Old timer with 9" cord and 45" span with a high lift foil 17" between wing TE and horiz stab LE 7" cord and 18" length on horiz stab (which has a lifting foil same as wing)
|
| Mobile phones & computer Tx? | 12 Jan 2004 17:27 GMT | 51 |
Anyone in the states heard of problems with mobile phones wiping out the memories of computer transmitters? Folks in the UK say they can. Any net sites I can look at please.
|
| Spain | 12 Jan 2004 11:08 GMT | 2 |
Does someone have some insight in the legal regulations to use a remote controlled airplane in Spain (frequencies, insurance etc). I am going to Spain for a while and would be happy for every advice. Thanks.
|
| engine turned monokote? | 12 Jan 2004 10:30 GMT | 2 |
Was I dreaming or was there really a covering that mimicked engine turning?
|
| Hobbyshops in London | 12 Jan 2004 07:00 GMT | 11 |
Is there anybody who knows any adress to some RC-shops in Central London (shopping area)? Products: especially OS. Regards
|