| Thread | Last Post | Replies |
|
| NiMH trickle charger? | 10 Jan 2004 15:48 GMT | 15 |
I'm after a basic mains-powered trickle charger for an 8-cell, 830mAh NiMH battery pack. I don't want to spend the earth (only just getting into the hobby, one model only), just want something which will do the job with reasonable peak detection.
|
| Futaba FF6 fault caused crash? | 10 Jan 2004 12:34 GMT | 5 |
Some time ago I lost a trainer (ARC Ready 2) when it kept suddenly rolling left, then recovered until it did it again as I was landing and - splat not much left. Stripped the components (Jeti single conversion receiver) and tested them with no problems - I'd put it down to ...
|
| combat plane homebuilt SSC | 10 Jan 2004 09:23 GMT | 6 |
Hey guys take a look at the plane that I am making for our club members. It came out to 2.54 lbs dry!! (has to weigh at least 2.5lbs) Flys great and will not tip stall. I fly it with the os 15 la. There will be 20 of these "kits" built for fun and practice, and of course combat. ...
|
| Quantum models' e-mail? | 10 Jan 2004 02:21 GMT | 2 |
Does anybody know the working e-mail address of the Quantum Models? The e-mail specified on the site, and another one found in the NG don't work... Of course if the service is still in business...
|
| OS MAX FP .20 | 10 Jan 2004 00:25 GMT | 3 |
Can anyone tell me where I can buy spares for this engine. I need the fuel inlet bar. Ta,
|
| Ailerons neutrality | 09 Jan 2004 21:08 GMT | 16 |
I am setting up a model with a flat bottom wing and a flat sheet aileron (actually a dura trainer). ----\ \------\
|
| Glue Rant | 09 Jan 2004 18:46 GMT | 20 |
I've had it with CA and Gorilla glue packaging! I have enough models, and seldom need to build. I still must do routine maintenance on my models, and glue other things around the shop. When I need glue, I don't need it tomorrow or next week. I need it _now_.
|
| Tiger Shark engines | 09 Jan 2004 17:22 GMT | 7 |
Anyone have any experience with the Tiger Shark engines? Sure look like a good value if they are reliable. Thanks in advance, Tom Bubb
|
| zz | 09 Jan 2004 15:24 GMT | 18 |
|
| Trim trouble | 09 Jan 2004 15:11 GMT | 11 |
Giving away my ignorance here, but. I'm looking for help from anyone here. The saga of the Citabria continues. It seems to be running ok now that it's fitted with a new engine.
|
| Laser cut kit links wanted.... | 09 Jan 2004 12:24 GMT | 1 |
80+ WS for P-38 and B-17, thanx ahead of time, Ken
|
| Where'd ya get your paints? | 09 Jan 2004 11:43 GMT | 5 |
Looking for camoflage paint for my Mk 1 Spit. I need duck egg green, dark earth, and olive drab I guess...my local shop doenst sell anything other than tiny Humbrol pots. I don't fancy painting 80 odd inches from them thank you very much!
|
| Suggestions for Semi-symmetrical trainer | 09 Jan 2004 07:12 GMT | 37 |
I am looking for a trainer (I know, common newbee question) that has a Semi-symmetrical wing (gives me a bit of versatility as I progress). What planes are available. I do not a package as I want to pick a good 6 channel radio.
|
| starting engines | 09 Jan 2004 04:34 GMT | 3 |
Hi all, I am new to this hobbie and have a Trainer with an SC 40 2 stroke glow plug engine. Can anyone give me any tips on starting and tuning this engine. I have a chicken stick and an ellectric starter. Thanks.
|
| club trainer | 08 Jan 2004 23:58 GMT | 20 |
I was wondering how most clubs handle their club trainer.Our "past"trainer met it's demise due to battery failure. I am presently putting another one together and have taken items donated from club members for the servos, and engine. The club bought the trainer new from the LHS. We ...
|