Model Forum / Radio Controlled / Air Models / January 2004

Please excuse my ignorance but is there any problem with mixing analogue and
digital servo's on the same reciever in the same model.
T.I.A
Regards

Anyone? I need a good straight crankshaft. I bent mine in a dirt nap!
email me at j.slaughter@verizon.net
Thanks!

Some time ago i bought a plan from vth.de for a trainer like plane.
It's a one meter wingspan plane with a speed 400 direct drive engine.
By now i have finished the fuselage and rudder. I'm planning to add
ailerons. My plan is to get rid of half the dihedral and using

Is the AMA Convention in Ontario California this coming weekend the same
event that used to be at the Pasadena Convention Center a few years ago?....
Does anyone have a link to the event on the Web?.....thx....LJ

Anyone any idea of the name of a product (UK) that is a substitute for dope
believed to be water based. Need to cover a veneered foam core wing and
don't want to risk damage to the core from the normal dope.
TD

WEEWEECHU !
One beautiful December evening Huan Cho and his girlfriend Jung Lee were
sitting by the side of the ocean. It was a romantic full moon, when Huan Cho
said "Hey baby, let's play Weeweechu."

Does anyone have experience masking and painting fabric covering?  I'm using
Solartex covering.  When I try to mask off an area, the paint tends to
bleed under the mask because the weave in the fabric doesn't allow a perfect
seal at the mask edge.  I've tried various masking ...

My Aerobird must have went down a little harder then I recalled last
time as when I plugged it in this time it started smoking.  I have
found the offending part part but the numbers are kind of burnt.
I believe the part its a Adjustable Voltage Regulator and the Numbers

I am developing a new game over the internet.
I need your help in the development of a arena.
Please answer some questions.
http://freeonlinesurveys.com/rendersurvey.asp?id=39391

I wanted to post this as a Thank-ya for all your help.
Im getting better with my slowstick - i still suck, but im crashing less every time i go
up. So far im limited to a stock plane with a 8.4x900 nimh pack and a 8.4x600 nicad, but
the lipos and brushless will be coming soon.

I am looking to join a flying club in the Brandon/ Valrico area of Florida
(outside of Tampa).
Ken

Anyone know if this site is still open to fly from (slope)
Cheers
Brett

I am looking at control options for my 1/8 scale locomotive. I am
interested in the possibility of controlling it by R/C. It isn't your
typical locomotive, though, in that it is ten feet long and weighs
nine hundred pounds <g>. In other words, it is a "ride on" locomotive.

Anyone flown a the Lanier 1/2 A Shrike using electric power? I recently
completed one with the intention of flying at the local school yard while my
son flies his SuperStar EP. Each attempt at flight has resulted in a short
30 - 50 yard flight eventually stalling straight ahead ...

http://www.rc-plane.net
Get a Plane a Day for 7 Days!
RCPLANE