Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / Radio Controlled / Air Models / January 2004



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
New year,new homepage and a new intro with flash03 Jan 2004 13:34 GMT3
Today ive change the intro with a flash intro and ive changed my home old
homepage index to a completed new one.
Take a look it now http://home.planet.nl/~vos08757/
                                                  Merry christmas and a
Also WANTED03 Jan 2004 10:44 GMT9
Good flying weather tomorrow, Friday (I think it is !)
New to RC flight03 Jan 2004 05:10 GMT5
Hi!  I'm wondering if I can get some guidance as regards how to get started
with RC flight.  I've always been interested in aviation (scanning, Flight
Sim, etc) but have never toyed with RC models.  For my birthday (55...) my
wife presented me with a RTF Aerobird Challenger.  The ...
Gravity feed fuel system?02 Jan 2004 23:04 GMT7
I'm using a Norvel 0.061 Start'up engine for a model hovercraft, and have
realised that the silencer (muffler to our American friends) is not suitable
for a pressurised tank system - at least I'm pretty sure it is not - here's
a link to the Norvel part:
Anyone built a Flair Cub? Need help!02 Jan 2004 17:20 GMT13
My dad's building a Flair Cub as his first model and there's a little
confusion over placement of the engine. We're actually using a MDS 38 Heli
engine with Aero head thru the building, I've noticed that the engine does
have a shorter prop shaft to an Enya 40 i've compared it to, ...
Electric Glider with Flaps02 Jan 2004 15:38 GMT3
I am building an FVK Silent Dream.  It has provision for a 4 servo wing
and I have a FF7 Tx.
I know how to set up a sailplane wing for this with flapperons but this
leaves me with a problem as to where to put the motor throttle as this
Storing Cells02 Jan 2004 12:54 GMT9
This should start something. How do I store/lay-up my flight cell packs for
the winter ? charged or discharged ? These are the ones that power the
motors, not the flight packs for the radios. Cheers, Ray
Super Tigre Parts02 Jan 2004 11:08 GMT2
I am looking for a site that has Super Tigre parts.  Specifically looking for a
crankshaft for a .45.  Thanks for any help.
Need Futaba Crystals for Boat (75 Mhz)02 Jan 2004 10:20 GMT5
I got an R/C model sailboat for Christmas and my old Futaba radio system has
aircraft (72 MHz) crystals in it.  I need a transmitter and receiver crystal
set on any 75 MHz channel for boat use.  Anyone have a set they want to
sell?  If so, please drop me an email at ...
Custom gear for 1/4 scale Sig Spacewalker II 02 Jan 2004 00:35 GMT9
Howdy,
    Anybody know of a manufacturer of custom gear for a 1/4 scale
Sig Spacewalker II?
    Thanks in advance.
RCU OK?01 Jan 2004 23:25 GMT3
Tried to get on but RCU is super slow and locked up my puter.
CCR
Quadra 52? 01 Jan 2004 20:41 GMT4
Does anyone know what the thrust out of a Quadra 52 is?
Thanks
Jason
battery exchange?01 Jan 2004 19:00 GMT6
I seem to recall that Airtronics had a program whereby a dead
Airtronics battery could be  exchanged for a new one. Is this still in
effect? If so, how does one go about the exchange? Thanks.
 Lynn
controller and joystick on RealFlight01 Jan 2004 18:23 GMT3
I have RF G2 with the gameport controller. Everything works fine. But
if I want to plug in my joystick for MS Flight Simulator, I have to
unplug the RF controller and remove the driver in control panel gaming
options and add the joystick driver. Can I use the Radio Shack
Futaba Training question buddy style01 Jan 2004 15:55 GMT4
I want to teach my son to fly, I have a Futaba Field force 7 super the
question is which is the cheapest Transmitter I can buddy up and still use
the mixing functions of the 7 as I want to let him fly my Zagi 480 electric
does the master transmitter do all of the mixing or do I need ...
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.