| Thread | Last Post | Replies |
|
| Test | 15 Apr 2004 04:19 GMT | 1 |
|
| Install the muffler on the Graupner Extra 300 | 15 Apr 2004 03:28 GMT | 1 |
Hi, I am building a Graupner Extra 300, and I will install on it a engine OS
91 4T.
I would like to put the muffler with the flexible link as specifiedon the
box but , is not described by any part as it has to be installed.
|
| Crystals | 15 Apr 2004 03:26 GMT | 7 |
A query regarding the difference between dual conversion and single
converstion. My son has just bought a Futaba 6exa set. The receiver
(I think) is not dual conversion. I have several pairs of crystal
which are dual conversion. Can these dual conversion crystals be used
|
| University of Florida sweeps MAV competition | 15 Apr 2004 00:14 GMT | 3 |
Gainesville, FL 4-12-04
Yesterday (4/11/04) afternoon Baron Johnson called from Tucson, the site of
this years MAV competition. http://www.engr.arizona.edu/MAVcompetition/
Great news...........Univ. of Florida won the overall competition, again.
|
| spitfire | 14 Apr 2004 19:01 GMT | 1 |
Check this link out. Sound is also attached
|
| Middle Stick? | 14 Apr 2004 17:23 GMT | 4 |
Anyone know where I can get plans for Ultra, or the old Middle Stick
planes??
Rgds/KajS
|
| Windshield material | 14 Apr 2004 15:39 GMT | 8 |
What material do you suggest for making a windshield? I have a kit and it is
missing the clear windshield, needs to be curved some when installing.
|
| Airspeed | 14 Apr 2004 03:23 GMT | 15 |
What's the formula for approximate airspeed calculation given RPM, prop
diameter, and pitch? TIA!
Dr.1 Driver
"There's a Hun in the sun!"
|
| Fuel Systerm | 14 Apr 2004 03:08 GMT | 2 |
Has anyone ran across the fancy fuel cans the jet jocks use? I saw one
at Superman 2004 but can't find them anywhere. They have the pump and
battery mounted right on the can.
If anyone has a link I would appreciate the help.
|
| Fantasia - Sonata etc | 13 Apr 2004 20:15 GMT | 2 |
I know these used to come from Balsa Cabin but someone said the designs have
been sold to another company who are now producing the kits - any idea who?
Romelluk
|
| Help with TT .46 fuel leak/bubbles | 13 Apr 2004 17:07 GMT | 8 |
I have started noticing my TT pro .46 is leaking fuel, and what appear
to be air bubbles, somewhere around the left rear bottom of the
engine. I have included a pic if that helps:
http://www.mparkes.com/ttpro.jpg
|
| Saito Pushrod Cover Seal Replacement | 13 Apr 2004 06:36 GMT | 1 |
Anyone know of a source for Saito pushrod cover seals, besides, of course,
buying them from Horizon. Saito doesn't sell them separately, you have to
buy the pushrod covers with the seals. Yea, I know, they are only $10.00 per
set, but it seems to me to be kind of a rip-off to have ...
|
| Whether to balance wings of different weights: | 13 Apr 2004 06:35 GMT | 42 |
I have completed wing panels that differ significantly in weight. A
63" wing span when assembled. The wings are both balanced around the
4th rib, but one wing seems to weigh 2-3 oz more than the other. I am
going to buy a grocery scale to measure with some degree of accuracy
|
| Hangar 9 Sure Cycle | 13 Apr 2004 04:06 GMT | 1 |
I was moving my cycler from my bench to the shelf, and I may have
accidentally moved a switch. For 4c battery packs, should I be cycling at
50 mA or 150 mA. Thanks.
|
| Zenoah G-23 Help | 12 Apr 2004 23:21 GMT | 14 |
I fired up my new G-23 for my Dr.1 today. I ran regular gas with 100:1 Amsoil.
It turned a 18-8 Scimitar prop at 6,800, right out of the box. I did not
adjust the needle valve factory setting. Does anyone have experience with this
engine? Does this sound normal?
|
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage
Start New Thread